Your cart is empty.
Your cart is empty.With CPU control and PFM technology, the charger has the advantages like high efficiency, good stability, low-carbon and energy-saving.Three-section charging mode-Controlling the charging current and voltage automatically and precisely, both ensure that battery is charged fully, and not over charged. Your battery life will be protected. Charger Model & Parameter:Rated input voltage--100/240V. Constant voltage 1,2,3--OLFP:14.6V ONCM:16.8V OL-A:14.7V. Floating charge voltage 1,2,3--13.8V(ONLY FOR L-A). Constant current 1,2,3--10.0A. Light turn green --LFP:5-10%CC NCM:5-10%CC L-A: 20-30%CC Before charging,please connect the DC terminal to battery firstly, and then connect the AC terminal. LED status:This charger has multiple two-color indicators (red and green), and three indicators correspond to one way output LFP, NCM, and L-A modes, as shown in the figure on the right. 3 indicators will work properly only one at the same time, depending on the current charging mode. Connected to AC, the indicator has a mode memory of the last power failure. When the red and green lights of the indicator are flashing slowly, the SEL button can select the mode and release it after selection, and then enter the normal working mode after 60 seconds. At this time, the SEL button is not available and needs to be re-powered before the selection function can be restored. Unpacking Inspection:Open the package case,check any missing or damaged part. 1XCharger,1XOperating manual,1XAC wire,3XOutput wire Matters Need Attention:1. Don't cover the charger or intake during charging.2.The charger should be placed where children could not touch.3.Please charging in indoor area where good ventilation and heat dissipation is.Prohibited charging where is humid, high temperature or a flammable, explosive gas surrounding.4.To avoid vibration damage, please don't carry the charger on the driving vehicle long time.5.It's danger of high voltage in charger case please do not disassemble it unauthorized.