Your cart is empty.
Your cart is empty.Product Description
Material: carbide alloy
1/4 Inch Shank 4Pcs Rabbet Router Bit Set with 6 Bearings Set (1/2", 5/8", 3/4", 7/8", 1", 1-1/8" Bearings)
Product Description:
4Pcs Rabbet Router Bits with 6 Bearings Set
Rabbet Router Bit with 6 Bearings Set,
Adjustable Multiple Depths 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" for Beginner DIY Woodwork (1/4 Inch Shank).
Note:
- Before the product is received for use, check the drill bit for cracks or chips.
- Determine the size of the wood and adjust the height of the finger joint before cutting, also suggest the testing piece before the actual cut to ensure fit.
- Always ensure that the safety measures prescribed by the machine are enabled.
- Make sure the bearing is on securely and can spin freely.
- Set the fence so it aligns with the guide bearing for the router table.
- Turn on the router and carefully cut it. recommend in a table-mounted router, keep the workpiece against the fence as you advance it past the bit.
Daniel Martin
Reviewed in Canada on May 28, 2025
Vraiment plus petit que je pensais.Mais fait bien le travail pour le prix
Javier A Moreno
Reviewed in the United States on May 26, 2025
for the job I want to do it is perfect...!!!
jr
Reviewed in Canada on March 29, 2025
tout est complet bearing viens dan des boites solides les couteux prise i/4 font la job
Giselia
Reviewed in Canada on March 23, 2025
Worked as expected. I’m happy with the purchase.
b
Reviewed in Canada on April 27, 2025
Good product for the price, the various sized bearings really add to the variability.
Silent thunder 154
Reviewed in the United States on September 1, 2024
Bought this kit to use with Rotozip tool and it worked great, good value for the money. I used it to cut and remove materials from T1-11 board. Very happy with quality.
MB in the OC
Reviewed in the United States on August 27, 2024
This set worked really well, super sharp, smooth cut. Also with different bearing widths included the rabbit can be different widths as well as depths. Also included is an adapter so you can use them in a 1/2" router not just 1/4". Very pleased.
CRF 614
Reviewed in the United States on July 29, 2024
Depths of notches aren't correct. They show 1/8" increments but the actual notch is 1/16 under that. If you do the math on them 1-1/4 wide cutter bit with 1-1/8 bearing will only leave a 1/16 notch on each side so isn't going to work for me. They work good and lots of options but I need the depth to be correct so ordered some others that the math comes out correct for it.
rayray
Reviewed in Canada on June 2, 2024
I am giving five stars only because the bits themselves are good. The Allen key on the other hand is very soft and strips very easily as well as the hex head bolts that hold the bearings. I had to use vise grips to remove the bolt and get a good allen key. Will have to replace the bolts The bits do cut well , I was using them on maple and had no problems
Revrant
Reviewed in the United States on March 30, 2024
These come sharp and are well constructed.The different bearing options are a really nice quality of life feature.The largest bit at full depth was a little rough in my use and chipped/chunked wood, so if you're planning on a cut like that, I would probably make it with a couple of passes instead of trying to go at it in one run (though it did work!)Good set
Todd Miller
Reviewed in the United States on March 19, 2024
The media could not be loaded.
Stephen K.
Reviewed in the United States on December 31, 2024
Just what I needed for a project I was working on.
Recommended Products