6 Pack Spa Hot Tub Pump Heater Union Gasket/O-Ring、 2.2'' ID 3'' OD''- for Unions Between the Union and Pump Wet end Fittings and Heaters and Union Fittings, Gasket Works fit on Variety of Spas
$9.89
$9.89
$
4
.99
$4.99
- Product Information: The outer diameter of the gasket is about 3 inches/76 mm, the inner diameter is about 2.2 inches/56 mm, and the thickness is about 0.1 inches/2.6 mm. After purchase, you will receive 6 spa hot tub pump heater joint flat gaskets/O-Rings. NOTE: This is a flat washer that has no lip on the O-ring (no ridge in the middle of the O-ring)。
- Widely compatible: Compatible with Solana TX spa, aquaflo xp3 water pump standard 3 inch outer diameter, spa tub gasket 3” also suitable for most spa pumps or heater joints.
- Product Function: Hot tub spa pool pump heater joint gasket/O-ring is installed on the joint between the joint and the pump wet end joint and the heater and the joint joint, providing an effective seal to prevent water leakage and ensure the normal operation of the system.
- Product Usage: The flat gasket is a heater accessory that is easy to install and can be easily connected to the heater joint of the pipe. It is used to connect to the heater joint of the 2-inch inner diameter pipe and heater. It is recommended to replace the gasket regularly to maintain the good operation of the pipe system and extend the service life of the equipment.
- Product Quality: The spa hot tub pump heater connector gasket/O-ring is made of silicone, soft and unbreakable, can withstand the high temperature water and steam environment in the hot tub, ensuring long-term reliability.
- Easy to Install: Use the silicone grease of your choice on one or both sides of the hot tub pump heater joint gasket to help hold the spa gasket in place when assembling the accessories, which also makes it easier to remove the collar in the future.
- Tip: This is a flat gasket/O-Ring, there is no lip on the O-Ring (no bulge in the middle of the O-Ring), please confirm your size and shape before purchasing.
