Your cart is empty.
Your cart is empty.
Details
Pulling Wire: The pulling wire is made of nylon and iron, which is more wear-resistant, durable and uneasy to pile up for easy starting.
Ergonomic Handle: The hand-pull starter features an ergonomic plastic handle that is non-slip and easy to use.
Air Filter: It can improve the air filtration performance of the machine, reduce wear and tear, and increase its service life.
Application
This product can be used widely with pumping machines, microtillers, cleaning machines, spraying machines, medicine machines, threshing machines, smoothing machines, etc.
How to Use
1. Fill with appropriate amount of special oil for petrol engine.
2. Trigger the fuel switch to the ON position.
3. Trigger the damper handle to the OFF position when starting.
4. Move the regulating valve switch from low speed to high speed.
5. Pull the starter handle slowly and firmly.
6. After starting, turn the damper handle to the ON position.
7. Turn the flame failure switch to the ON position.
Specification
Material: Aluminum, Iron, Cast Iron, Plastic
Fuel Type: Gasoline
Lube Oil Capacity: 0.6L/0.16gal
Engine Oil Capacity: 3.6L/ 0.95gal
Max. Torque: 10.8N-m
Bore Stroke: 70*45mm/2.76*1.77inch
Displacement: 160cc
Engine Type: 4-strokes, Single Cylinder, Air-cooled
Horsepower: 6.5HP
Speed: 3600rpm
Fuel Consumption Rate: 360g/kw.h
Max Power: 3kw
Rated Power: 2.8kw
Shaft Diameter: 20mm/0.79inch
Rotation: Clockwise
Starting System: Pull Start
Packing Size: 48*38*37cm/18.9*14.96*14.57inch
Product Size: 36*25*32cm/14.17*9.84*12.6inch
Gross Weight: 14.45kg/31.86lbs
Net Weight: 12.35kg/27.23lbs
Package Included
1 * Petrol Engine
1* English Manual
Other Accessories for Installation
Notes
1. Please read the instructions carefully before use.
2. Please note that do not use indoors due to danger of carbon monoxide poisoning.
3. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
