Your cart is empty.
Your cart is empty.
Aidata CH012A Metal Arm Copy Holder, Adjustable Viewing Angles, Flexible Metal Arm with Desk Clamp, Sturdy Plastic Pad, Attachable to Desks up to 1.75" Thickness, Metal Arm Extends up to 20"'
This copy holder attaches to your workstation with a c-clamp. With its metal arm, it has an overall reach of approximately 20". Document holders help to increase productivity and comfort at your workstation. This copy holder is ideal for reducing stress on your back and neck. Great for home, office, dorm rooms, libraries, hospitality, clinics, hospitals, banks, schools and universities.
Key Features
- Easily view copy material with the adjustable viewing angles
- Adjustable clip for different paper sizes
- Sturdy plastic Pad and Flexible metal arm with desk clamp attaches to the desk thickness up to 1.75"
- Removable and see through line guide
- Metal arm extends 20''
Specifications
- Dimensions: 13"H x 10.5"W x 4.2"D
- Weight: 2 lbs
Assembly Notes
- If you have trouble assembling the unit please contact Aidata USA for technical support.
j.r.
Reviewed in the United States on October 27, 2023
I'm returning this.It does not articulate enough for my purposes.The joints where it articulates have plastic rather than metal plates.Just does not appear that it will last.
A. Williams
Reviewed in the United States on February 3, 2021
I very much like most of the design of this copy holder. It is listed as having a metal arm, which is only partially true. The arm rods themselves are metal, but all of the joints are plastic. They do have metal screws, which are well designed. Overall the arm is pretty sturdy. My biggest problem of the arm is that it does not bend 180 degrees. The bottom portion of the arm will only move 45 degrees. This would be fine, except for the next flaw.The copy holder itself is mounted on a fitting that does not allow it to rotate 360 degrees. It is therefore not able to be rotated all the way around to accommodate a full range of placement. The limited motion of the arm, combined with the limited rotation of the copy holder means that it is a right side only stand and even then, it doesn't put the copy holder in the right position due to my desk/hutch configuration.Finally, all of the flaws are not terminal. I will look for other mounting positions on my desk to see if I can find the position I want it. Also, I believe that it can be disassembled and reconfigured to make it left handed. I may try this if I get ambitious. I am torn between a three star and four star rating. I would recommend it with the caveat that you may need to work around the limitations or be handy enough to reconfigure it to your taste.
Keith B
Reviewed in the United States on April 9, 2021
This thing works great, read instructions first it’s a bit tricky to turn on for the first time.
Rivkeleh
Reviewed in the United States on September 22, 2020
I chose this item because I assumed that a metal copy holder would be sturdy. I was shocked to find that they've complied with the letter of the law by saying that the "Arm" is metal; what they don't say is that nothing else is, and the copy holder itself is badly made of amazingly thin plastic. It barely attaches to the metal arm. It has no clip to hold the papers onto the copy holder, just the slide-on straight-edge device. DO NOT RECOMMEND. WOULD NOT BUY AGAIN. Am likely going to modify something else to use the only useful part of this - the metal arm. So frustrating.
Dave Smith
Reviewed in the United States on June 3, 2020
I knocked it down a bit on sturdiness because if you have ever worked in an office with one of these, this is NOT one of those bulletproof office versions. As long as you understand that you will have to be gentle with it I believe it will work fine... only time will tell... but so far so good!
Rob
Reviewed in Australia on October 19, 2020
Works ok, Fairly lightly made design, clamp is good and arm can hold a phone’s weight. No double pivot on the paper holder end so can’t tilt back at all without the arm directly behind it. So completely reliant on the paper holder spring loaded bit for the documents to not fall off. Fits A4 paper well as it is slightly larger than A4.
Melissa Simonelli
Reviewed in the United States on November 7, 2019
A bit flimsy and cheap. Wish it was more sturdy
Collin Shanks
Reviewed in the United States on April 2, 2018
Really durable construction. Easy to manipulate and put in an endless variety of positions. Very good. I recommend.
JB
Reviewed in the United States on April 8, 2017
Works pretty well - sturdy enough to hold a book - needs to be tightened really well though
Recommended Products
$27.33
$ 13 .99 $13.99