Shopping Cart

Your cart is empty.

Your cart is empty.

Air Pneumatic Cylinder, MHZ2‑16D M5‑0.8 Airs Inlet Thread Double Action Parallel Cylinders

4.7 (1) Write Review
Free shipping on orders over $29.99

$18.56

$ 8 .99 $8.99

In Stock
  • HIGH HARDNESS: The cylinder is a hard oxidized cylinder block, which increases the hardness, is not easy to deform, and is compression and .
  • HIGH PRECISION: The cylinder adopts high strength accuracy rail, which is not easy to loosen, the steel ball does not fall, the work is smooth, and the accuracy is high.
  • WELL SEALED: The cylinder is equipped with a circlip super sealing and self lubricating seals to prevent gas blow by in the left and right chambers of the cylinder, with small errors and high working efficiency.
  • GOOD PERFORMANCE: This finger cylinder can bear larger side load and moment, suitable for accuracy assembly.
  • GOOD DURABILITY: This is a 0.7Mpa cylinder made of high quality aluminum alloy, strong and , not easy to damage.


Product Description

Gripper Pneumatic Cylinder

  • Item Type: Gripper Pneumatic Cylinder
  • Material: Aluminum Alloy
  • Model: MHZ2-16D
  • Bore Diameter: Approx. 16mm / 0.63in
  • Working Pressure: 0.1-0.7MPa
  • Airs Inlet Thread: M5-0.8
  • Claw Distance When Closed: Approx. 14.9mm / 0.59in (There is an error of ±0.3mm in manual measurement)
  • Claw Distance When Opening: Approx. 20.9mm / 0.82in (There is an error of ±0.3mm in manual measurement)
Pneumatic Finger Cylinder

Gripper Pneumatic Cylinder Double Action Parallel Grippers Cylinders MHZ2‑16D M5‑0.8

  • Stroke: Approx. 6mm / 0.24in
  • Outer Diameter Clamping Force: 34N
  • Inner Diameter Clamping Force: 45N
  • Environment and Fluid Temperature: -10~60℃
  • Repeatability: Approx. ±0.01mm / 0.0004in
  • Maximum Frequency: 180c.p.m
  • Give Oil: Not Needed
  • Liquid: Airs
  • Action Type: Double Action

Package List: 1 x Finger Cylinder

Parallel Gripper Cylinder

Double Action Gripper Cylinder

Finger Gripper Cylinder

Pneumatic Cylinder

1012210192711-2

1012210192711-3


  • Note:
  • 1. In strong magnetic environment, use a switch cylinder with strong magnetic field resistance;
  • 2. When there is a lot of dust, water droplets or oil droplets, a telescopic protective sleeve should be used on the cylinder rod side;
  • 3. In environment with iron powder and iron filings nearby, if is not protected, the magnet will attract the iron powder and iron filings to gather around, which will weaken the magnetic force in the cylinder, which may cause the magnetic switch to fail;
  • 4. In the high and low temperature environment, the cylinder sealing ring should be high temperature resistant or low temperature resistant sealing ring.
  • 5. The distance between the cylinder barrels of the two parallel cylinders must be greater than 40mm, otherwise the magnetic switches of the two cylinders will be interfered with each other and cause malfunction.


Eri
Reviewed in the United States on October 11, 2024
The product arrive as expected