Your cart is empty.
Your cart is empty.
Magnetic Reed Switch Alarm Recessed Mount Wired Contact Sensor Connect to the alarm.
Recessed easy to install, good concealment, fashion and beauty, Anti-fire ABS.
Switch Type: NC/NO, NC means Normally Closed:When the magnet together, the circuit is conductive( light on ); when the magnet separate, the circuit is not conductive ( light off ). NO means Normally Open:when the magnet separate, the circuit is not conductive( light on );When the magnet together, the circuit is conductive ( light off ).
Work as an anti-theft alarm, ideal for wood door and window.
Specification:
Model: RC-33A
Material: ABS
Color: White
Max Power: 10W
Max Voltage: 100V
Max Current: 0.5A
Min Temperature: -22℉
Max Temperature: 140℉
Actuation Distance: 20-30mm
Contact Type: NC/NO
Size(Approx): 18.5 x 10mm(L*D)
Package Content:
2Sets x Magnetic Door Switch.
Note:
1: Please Drill installation hole with a diameter of 10 mm, The door and window magnet should be installed at the closed position of the door/window/drawer.
2: The magnet part is installed on the movable door and window. The switch part is installed on the fixed door and window frame. The switch part and the magnet part should be aligned as much as possible.
3: The door magnet should be away from the strong magnetic field interference source such as a transformer. Otherwise, the working characteristics of the door magnet will be changed and possible wrong actions.
4: Door magnetic can only provide switching signal, can not be directly loaded, need to be connected with the power supply or lamps and lanterns into a set of system.
