Your cart is empty.
Your cart is empty. Specification:
Material: ABS
Maximum Rate: 24L/h
Water Storage Capacity: 200ml
Voltage: US Plug 110V 60HZ
Applicable Power: 8KW
Maximum Head: Approx. 10m / 32.81ft
Noise: 40.5dB
Operation Level: Non Continuous
Environmental Temperature: 0-50 ℃
Application: Suitable for 1-3GP wall mounted or cabinet mounted machines.
How to Use:
1. Cut off the power supply.
2. There are two water inlets to choose from, one on the top of the pump and one on the left of the pump. Please choose a suitable drainage outlet to connect. The outer diameter of the water inlet is 20mm.
3. Fix the installation plate in a suitable position, and the installation plate is inside the accessory.
4. Connect the drainage pipe of the system to the water inlet of the drainage pump, connect the drainage port of the drainage pump with a plastic pipe with 9 OD x 6 ID, and fix it with a tie, the tie is in the accessory.
5. The drainage device cannot be installed inside the air conditioning host or the power circuit box.
Package List:
1 x Condensate Pump
1 x Power Cord
2 x Screw
2 x Wall Plug
1 x Water Hose
1 x Hanging Board
