Shopping Cart

Your cart is empty.

Your cart is empty.

Bundle of Red Lion RL75WA 115 Volt, 3/4 HP, 8400 GPH Sewage Pump with Piggyback Tethered Switch and 20-Ft. Power Cord, 14942664 + Red Lion WCV2 Heavy Duty Sewage 2-inch PVC Check Valve, 14942914

5.0 Write Review
Free shipping on orders over $29.99

$492.92

$ 99 .00 $99.00

In Stock

About this item

  • APPLICATIONS: ideal for use in basins or lift stations and suitable for pumping sewage and effluent; commonly used for basement bathroom installations to connect to sewage system
  • SEWAGE CHECK VALVE: 2-inch heavy duty sewage check valve; rated 125 PSI @ 72 degrees F, compression end type; no metallic parts; corrosion resistant
  • BUILT TO LAST: Heavy-duty cast iron housing and volute; clog-resistant vortex-style impeller design is capable of handling 2-inch solids
  • APPLICATIONS: For use with sewage pumps with 2-inch fittings or 2-inch IPS sized plastic or metal pipe
  • AUTOMATIC OPERATION: piggy-back tethered float switch activates pump when liquid rises to 17 inches; shuts off when liquid falls to 10 inches; converts to manual mode for testing or troubleshooting
  • VERSATILE Designed for both horizontal or vertical use
  • ENERGY EFFICIENT: Permanent Split Capacity (PSC) motor, 115-volts, 11 Amps, 1200 Watts, thermally protected
  • COMPRESSION STYLE: works with 2-inch IPS sized plastic or metal pipe
  • SPECIFICATIONS: 3/4 HP, 8400 GPH at 0' Ft. Lift, 11 Amps, 2-inch FNPT Discharge, 28-Ft. Shut-off, 20-ft. cord with plug
  • PVC WEIGHTED AND SHIELD FLAPPER DESIGN: Angle seat and PVC weighted and shielded flapper design for low pressure seal; will retain backpressure up to 125 PSI


From the manufacturer

RLWA Series A+ Content Main Image 970x600
RLWA Series A+ Content Callout 970x600

RL75WA Technical Specifications

Motor 115-volt, Permanent Split Capacitor (PSC) motor with thermal overload protections
Horsepower 3/4 hp
Amperage 11 running Amps
Wattage 1200 Watts
Discharge 2" FNPT
Switch Piggyback tethered float switch; on at 17" - 20" (432 mm - 508 mm); off at 10" - 12" (254 mm - 305 mm); piggyback plug allows pump to be easily switched to manual mode for testing or maintenance
Performance at 0' lift 8,400 gph (31,797 lph)
Performance at 5' lift 7,800 gph (29,526 lph)
Performance at 10' lift 6600 gph (24,984 lph)
Performance at 15' lift 5,400 gph (20,441 lph)
Performance at 20' lift 4,200 gph (15,899 lph)
Performance at 25' lift 2,400 gph (9,085 lph)
Shut-off 28' (8.53 m)
Cord length 20' (6.1 m) with 3-prong 115-volt plug; fits standard North American outlets
Minimum basin diameter 18" (457 mm)
RL75WA A+ Content Application 970x600

Product Selection Tips:

  • Never use a sewage pump as a sump pump. A sewage pump is much more powerful than a sump pump and will turn on and off too frequently wearing out the motor prematurely.
  • The 1/2 hp RL50WA is designed average-volume wastewater removal and is typically used for basement bathroom installations. Only upgrade to the RL75WA if you have a multiple jet shower system or if more than one bathroom will be using the pump.