Your cart is empty.
Your cart is empty.Product Description
Universal Ceiling Fan Remote Control Kit for Hampton Bay
Works for most 3 speeds AC ceiling fans. Compatible with Hampton Bay, Hunter, Harbor Breeze, Honeywell, Westinghouse, Home Decorators Collection, Minka Aire and other brands.
This HD6 remote control have HI/MED/LO 3-speed and OFF for fan speed control.
The UP LIGHT / DOWN LIGHT is dimmable when you press it a long time, short press controls light ON/OFF.
Easy to Set Up the Remote Control
1. Setting the same codes on the transmitter and the receiver.
2. 16 different frequencies that can be set for the receiver and the transmitter.
3. The default setting is 0000, and it is not recommended.
Tips: Remote control's 4 DIP switches are in the battery compartment (they are hidden behind the slot for the battery itself).
Specification
- Input voltage: 110-120V
- AC Frequency: 50/60Hz
- Require Battery: 9V battery
- Properties of Lights in Controller: Relay contact on/off
- Transmission Mode: Radio Frequency (RF)
Please Note
1. If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.
2. If you have multiple ceiling fans in your home, please make sure that the PIN code settings are different between them, otherwise it is likely that the transmitter next door activates the ceiling fan in your bedroom. This will cause the ceiling fan to turn on strangely while you sleep.
Easy to Install
1. Remove ceiling fan canopy from the mounting bracket
NOTE: Remove power from the circuit.Otherwise power can cause serious injury or death.
Remove ceiling fan canopy from the mounting bracket
Disconnect existing wiring between ceiling fan and supply in electrical junction box
2. Setting same the codes on the remote control and receiver
NOTE: The code used by the transmitter and receiver must be exactly the same, otherwise remote controller will not work.
16 different frequencies that can be set for the receiver and the transmitter.
The default settings is 0000, and it is not recommended.
3. Installing receiver in ceiling fan
WARNING: Remove power from the circuit. The electrical wiring must meet all local and national electrical code requirements. The electrical source and fan must be 110~120 volt, 60Hz.
The receiver wires are labelled, and the wires all have the correct color codes. Make connections as follows, using the wire nuts suppliied.
4. Install a 9V battery
Install a 9V battery (NOT INCLUDE in the Package) in the remote, and you can control your fan now.
Please NOTE:
This receiver has one more orange wire that the regular receiver because it can match one more set of lights than other ceiling fan receivers. When the ceiling fan has only one set of lights, one wiring of the receiver and the corresponding dimming button of one of the remote controls will be idle and will not affect use.
Jody-Lynn
Reviewed in Canada on April 7, 2025
Perfect. Put 9 voltage in it and it worked. Love the ease of it.
Katherine Gilhousen
Reviewed in the United States on April 2, 2025
Be aware! This particular fan remote replacement does NOT have fan reverse!!!
E. V. Wong
Reviewed in the United States on August 16, 2024
Best Priced.
Customer
Reviewed in the United States on June 30, 2024
The unit was easy to install and set up but lacks the ability to reverse direction of the motor
Paul Fletcher
Reviewed in the United States on June 3, 2024
The remote was an excellent replacement for the broken when we had for many years all features work as intended.
Jamie
Reviewed in the United States on May 25, 2024
I don't usually write reviews but I am so impressed with this product I wanted to share with others- simple to swap out for an old Hampton Bay remote kit, works perfectly. This is specifically for a ceiling fan with BOTH up and down lights, and it works perfectly and as described with lower light dimming capabilities. It also uses a conventional 9V battery (not included) unlike the old remote which required the more obscure A23 battery.
Darragh
Reviewed in the United States on March 12, 2024
The house I bought had one of these for the living room and it broke from one of my dogs. So I ordered another and works great. It's easy to figure and already programmed to function when batteries are put in. Very affordable replacement. I never had issues with the one before but obviously dogs can break anything if left in the wrong place. I buy it again if this one needs to be replaced again.
RICARDO
Reviewed in Mexico on July 27, 2023
Cumple con todas las funciones
Jonathan Starkey
Reviewed in the United States on February 28, 2023
This remote was for a fan that the remote would pick and choose when the light would turn on or off and dim. The set up of this remote allows you to have one button for on/off and one to brighten/dim. The location of the switches on the fan was very difficult to get to in an attempt to double check it was not a DIP switch issue. The remote was easy to match up and works great.
Stylist4u
Reviewed in the United States on October 1, 2023
I put off ordering this remote because I was afraid that it would be hard to program. I was so wrong! U just make sure that the 4 prong setting is just like old remote & that’s it! Works like a brand new fan again! I’m so happy!
marilyn sainchuk
Reviewed in Canada on July 11, 2022
Swapped the battery out of the old one, confirmed the jumper settings and it worked first time.
Recommended Products
$14.95
$ 7 .99 $7.99