Your cart is empty.

CertainTeed WinterGuard HT Waterproofing Underlayment - Single Roll

5.0 Write Review

Free shipping on orders over $29.99

$277.17

$ 99 .00 $99.00

In Stock

1.ItemPackageQuantity:1

2.Qty.:

Roll Length: 65 feet Roll Width: 3 feet
Roll Coverage: 195 square feet Roll Weight: 53 pounds /roll
Roll Thickness: 45 millimeters typical Compliance Codes: Meets ASTM D1970
Do not expose WinterGuard permanently to sunlight. Cover WinterGuard as soon as possible with a permanent roof surface. The maximum exposure time is 6 months.
Do not apply WinterGuard over shingles or underlayment of any sort.
WinterGuard may become slippery under certain weather conditions. When this occurs, avoid walking or crawling on the product.
WinterGuard will not adhere to wet or cold surfaces. For cold weather tack down, use only roofing nails. Under no circumstances should staples be used with WinterGuard products.

Store WinterGuard rolls in their packaging in a dry, protected area at a temperature not exceeding 110°F.
Low-slope application: WinterGuard HT can be applied beneath shingles, slate and mechanically fastened tile to acceptable decks with slopes of 2 inches / 12 inches or greater and beneath metal to acceptable decks with slopes of 0.5 inch / 12 inches or greater.
WinterGuard is warranted against manufacturing defects and to remain watertight for the same period as the warranty duration carried by the roofing product applied above it – up to a maximum of 50 years.

The CertainTeed Winterguard ProHT Waterproofing Underlayment is an advanced, self-adhering, high-tack, high-temperature membrane that is made to withstand high roof temperatures up to 250F under metal roofs. It is designed for application underneath low-slope shingle, low-slope tile, low-slope metal, and low-slope slate roofs and is composed of a sturdy support that is impregnated and coated with asphalt that is SBS-modified. Winterguard HT has a film on the top that is tear-resistant and will not scratch the metal roofing that it is placed under. The bottom surface of the Winterguard is adhesive, and it is covered with a release film that is silicone-coated. This release film is also split down the center horizontally for easier application. Winterguard can not be left uncovered for more than 6 months. Please Note: WinterGuard is a vapor barrier. Therefore, if WinterGuard is applied over a majority of the roof deck, proper deck ventilation must be provided. If WinterGuard must contact sealants or cements, use solvent-based products sparingly, following the manufacturer's instructions carefully. Excessive use of solvent-based adhesives can damage WinterGuard's polymer-modified asphalt coating. Do not use silicone-based sealants, as they do not maintain adequate long-term adhesion to asphalt.

Shopping Cart

Your cart is empty.

CertainTeed WinterGuard HT Waterproofing Underlayment - Single Roll

1.ItemPackageQuantity:1