Your cart is empty.
Your cart is empty.
Coin ring center punch and die set of 4 dies and 9 push rods. These dies are made to do the Swedish Wrap Method. The inside angle is 7 degrees. Also, with 4 different sized dies made up of steel for maximum durability. Die 1 is approximately 1.4" at the top and 1.15" at the bottom. Die 2 is 1.3" at the top and 1.05" at the bottom. Die 3 is 1.2" at the top and .95" at the bottom. Die 4 is 1.1" at the top and .85" at the bottom. SW dies are 1-1/8" tall. These dies are hardened and the inside of the die is polished very smooth. The push rods are made out of aluminum. The push rod sizes are 1-5/16", 1-1/4" 1-3/16" 1-1/8" 1-1/16" 1" 15/16" 7/8" 13/16" 4 dies and 9 push rods. The new design of our hole punch set makes it much easier to use these coin-ring metal dies consistently for your punched coins. The 4 punch sizes of this jewelry-making kit make it versatile for various uses. It comes with updated die design clearance that allows coin punch-outs to clear the dies.
VERSATILE APPLICATIONS & MULTI-FUNCTIONAL:
It's versatile enough to be used for a variety of applications, such as for getting a perfect circular shape for jewelry, bolt washers, rings, and many other metal die projects. This metal punch tool provides precise and clean designs, making it ideal for both professional and amateur craftsmen. This is a great jewelry-making tool for jewelers to make perfect coin ring shape jewelry with its four various size punches and 9 Push Rods that can be used for various metal processing projects. It can be used with a hammer to save time and effort.
Keith Hill
Reviewed in the United States on February 6, 2025
Watch out for sizing.As a newcomer and starting out with quarters they will fall through the smallest die.
John Shiplette
Reviewed in the United States on September 26, 2024
I am new at making rings. This tool is a must have.
Tim Shanahan
Reviewed in the United States on October 23, 2024
This is a cheaply made product and if you are off-center you will gouge the dies. The metal is too soft and the tapper too steep for this metal, and is rough enough that it matters to a ring maker. I won’t be using these or wasting my time packing and mailing it back. Also, 7 degrees is a little much for soft metal. You’re better off with 5 degree of angle and hardened steel, polished to higher smoothness. Just go to Jasons.works, like I am now, and get the last tools you’ll need for this part of the job.
Harry Hunt
Reviewed in the United States on April 22, 2024
The solid set were as advertised. Looks good and had no problem replacing the old set.
Melba Harris
Reviewed in the United States on April 22, 2024
Was able to put together some great products, made money back and then some.
Bill Sundell
Reviewed in the United States on November 24, 2023
work well if handled properly, delicate
jessica
Reviewed in the United States on October 3, 2023
Thankfully I watched some YouTube videos before getting these so I knew what to do. 25 wraps of Teflon tape is a MUST! They work great. Very happy with the product and the price
Susan C.
Reviewed in the United States on August 4, 2022
They need to be polished a bit better
Recommended Products
$82.50
$ 38 .99 $38.99