Your cart is empty.
Your cart is empty. Specification:
Item Type: PWM Fan Speed Temperature Controller
Material: PCB
Working Voltage: DC8-60V (must be equal to the fan voltage, if you use a 12V fan but supply 24V, it will burn the fan)
Working Current: Control board working current 35mA (12V) 22mA (24V)
Control Ability: Not limited by the fan current, but the pin current of the fan interface on the board should not be greater than 3A current. When using a fan with a higher current, please connect the fan power cable directly to the main power supply!
Control Output Range: (this is only the output range, the actual situation depends on the fan performance)
Temperature Probe: 10K B=3950
Temperature Measurement: -9.9°C-99.9°C, error 2°C (1% probe within 70°C) 3°C ( 70°C)
Temperature Control Temperature Zone Range: Acceleration temperature 5-94℃, full speed temperature 10-99℃
Speed Measurement: 10-9990 rpm, if the speed is greater than this, it will always display , the resolution is 10 rpm, and the display unit is 10 rpm (the speed measurement is designed according to the common 2-pole fan, and most fans are 2-pole )
Stop Alarm Speed: Lower than 375rpm
Circuit Size: Approx. 65x65x15mm/2.56x2.56x0.59in
Positioning Hole Center Distance: Approx. 56x56mm/2.21x2.21in
Diameter: Approx. 3.2mm/0.13in
Package List:
1 x Module
2 x Cable
