Shopping Cart

Your cart is empty.

Your cart is empty.

DIANN 6pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm Walking Helicopter Airplane Car Boat Control with Cable M-F

5.0 Write Review
Free shipping on orders over $29.99

$9.99

$ 4 .99 $4.99

In Stock
  • Mini Servo Motor is High Efficiency and Power;Operating Voltage: 4.8V~6.0V,Amplifier Type: Analog Controller,Dead Band Width:5μsec
  • Servo Motors have Built-in Circuitry to Control their Movement;Operating Speed:0.09 ± 0.01 sec/60 degree(4.8V);0.08 ± 0.01 sec/60 Degree(6V)
  • Mini SG90 Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm);SG90 Runs on Electricity from a Battery and Spins at High RPM and Very High Torque
  • SG90 Motor Come With 3 Wire Interfaces Compatible With JR & FUTABA Interface;Connections Should as Follows: Red Wire-5V, Brown Wire-Ground, Yellow Wire-Digital Pin 9
  • Application: SG90 Micro Servo Motor is Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys


Product Description

brand
09512

09512
Mechanical Specification:

  • Limit Angle: 180°± 1°
  • Connector Wire Gauge: ＃28 PVC
  • Spline: 21T
  • Horn type: Cross,Star and Bar-Type
  • Package Contents:
  • 6× SG90 9G Micro Servo Motor
  • 1x 10Pin Dupont Cable 20cm M/F

SG90 9G Micro Servo

Specification:

  • Centering Deviation: ≤ 1°
  • Neutral Position: 1500 μsec
  • Dead Band Width: 7 μsec
  • Control System: Change the Pulse Width
  • Amplifier Type: Analog Controller
  • Operating Trave: 180°±1° (500→2500 μsec)
  • Left&Right Travelling Angle Deviation: ≤ 6°
  • Rotating Direction: Counter Clockwise (500→2500μsec)
  • Pulse Width Range: 500→2500 μsec
  • Maximum Physical Angle: About 200° (Manual control)
  • Applications:
  • SG90 Micro Servo Motor is Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys
09512

Wire Layout:

  • Electrical Specification (Function of the Performance): Operating speed (at no load): 0.09±0.01 sec/60°(4.8V ) 0.08±0.01 sec/60°(6V)
  • Running Current (at no load): 400±30mA (4.8V ) 500±30mA(6V)
  • Stall Torque (at locked): 2.0±0.20kg·cm (4.8V ) 2.2±0.20kg·cm(6V)
  • Stall Current (at locked): 1300±40mA (4.8V ) 1600±50mA(6v)
  • Idle Current (at stopped): 6±1mA (4.8V ) 6±1mA(6v)
  • Running life(at no load): >350000 Turns(4.8V ) >320000 Turns(4.8V )