Your cart is empty.
Your cart is empty.Product Description
korina castro
Reviewed in the United States on May 7, 2025
It was very useful for my project and a good price. I recommend it.
Kowalski
Reviewed in Germany on May 4, 2025
EVA Schaummatten gibt es in verschiedenen Dichten und diese Matte hier, hat 86 kg/m^3. Das Gummi bietet also einen gewissen Widerstand beim Zusammendrücken und läßt sich, bedingt durch die Festigkeit, auch sehr gut schneiden und verarbeiten. Wer solche Platten kauft, weiß auch meistens, wofür er sie einsetzen will. Von daher muss man da nicht allzu viele Worte verlieren.Die Schaummatte kommt eng zusammengerollt in Folie verschweisst an. Bei einer Breite von 34 cm ist die Umverpackung auch entsprechend klein, was mich zuerst wunderte, bis mir einfiel, dass die Matte ja nicht viel breiter als ein DIN A4 Blatt ist.Der EVA Schaum zeigt eine homogene und fehlerfreie Oberfläche und ist fast geruchlos.Fazit: Jederzeit wieder kaufen.
The Van Andels
Reviewed in the United States on May 12, 2025
EVA foam is a wonder-material when it comes to crafts. It's flexible, pliable, easy to cut, texture, and glue... the possibilities are endless. I use this stuff primarily for making terrain for miniature wargames, but it's great in a pinch for wearable crafts, too. I ordered this particular brand (in 2mm thickness) in a couple different colors. I'll be honest, I almost always seal and paint it, so the color doesn't matter much to me, but if it does to you, the colors of the foam itself matched the images EXACTLY.Now I do have one minor quibble with this foam, specifically: it's not great at holding pressed textures. For example, if you are using a texture roller, you need one with really deep, exaggerated geometry and you want to use a lot of pressure. The foam will "spring back" a fair bit. Part of this is due to how thin it is (thicker foam holds pressed texture better) but I've used other EVA foams that haven't had so much spring-back.It's a minor complaint, really, but if that's your use-case, just keep it in mind.
Stewart D
Reviewed in the United States on May 12, 2025
This EVA Foam works great. I have been making props and costumes for a local play and this has work perfect to help out with that. It cuts and forms well and has been easy to work with!
Jens
Reviewed in Germany on May 12, 2025
Im Rahmen des Amazon Vine Produkttester Programms konnte ich das Produkt für einen Test kostenlos anfordern.Der Schaum besteht aus EVA = Ethylen-Vinylacetat, ist weich, flexibel und gleichzeitig sehr widerstandsfähig.Wir haben den Schaum zum Basteln verwendet. Er lässt sich sehr gut mit Schere und Cuttermesser zuschneiden. Zur Verklebung haben wir Kontaktkleber verwendet, beidseitig auftragen , ablüften lassen, zusammenfügen und mit einer Rolle nochmal anpressen.Da wir bis jetzt nichts negatives an dem Produkt feststellen konnten bewerte ich es mit "sehr gut" , das entspricht 5 von 5 Sternen
Buckles
Reviewed in the United States on May 11, 2025
Very dense & durable, but also VERY easy to cut and shape (as long as you have a sharp razor). The only downside was how curled it was coming out of the role.... you'll wanna have time to let it rest and relax. I didn't use this for cosplay, but rather for acoustic panels..... worked GREAT !!
Jimmy
Reviewed in the United States on May 11, 2025
• High Quality EVA foam.• Constant in color, thickness, & density.• Easy to cut to desired shape.• Packaged with no damage or creases - 100% Usable Roll• Good value for sure.
Annonymous
Reviewed in Canada on May 10, 2025
EVA foam is a fantastic material overall—it cuts cleanly, glues easily, and in many cases, works great for laser cutting (though it can be a bit smelly). If you're using an IR laser, you likely won’t run into issues. Diode lasers, however, can be a bit picky depending on the material and colour.That said, I’m happy to report this EVA foam cut beautifully with my laser (for exact specs: FoxAlien 80W diode laser module. I suspect most diode laser engravers could handle this material + colour combo to some degree though). I reduced power to 50% and set the travel speed to 500mm/min. I’m sure I could tune those settings further, but my laser setup is still temporary since moving, and I currently don’t have it vented outdoors.Important tip: If you're planning to cut EVA—or most materials—with a laser, proper ventilation is a must. The fumes are unpleasant and likely unsafe in enclosed spaces. Also, monitor your laser cutter closely when cutting EVA, and definitely don't leave the room while cutting, as I've heard EVA can be a significant fire hazard for laser cutting.Also, I love this colour, I used to seeing black and some brighter colours, so this earthy brown is fantastic to have available!
MS
Reviewed in the United States on April 30, 2025
Great quality EVA foam. It is 2mm thick as advertised and great for craft use or any projects that call for high density EVA foam. It's a also a great insulator and sound deadener if needed for that use. It's not very hard and has a little bit of a give to it.Well packaged roll with no damage or creases. Overall great as advertised foam. It's a also a great insulator and sound deadener if needed for that use.Overall very satisfied with it.
Juju
Reviewed in the United Kingdom on April 27, 2025
This roll of Do2ping EVA Foam Sheet is really easy to work with. The orange colour is good and consistent throughout. At 6mm thick, this is great for crafts or lining boxes etc. I have put some in the bottom of some craft storage boxes so that the contents don't move as much. It was easy to cut with scissors or use a knife, and simple to cut shapes for children. No crumbling, clean edges, easy to work with. Priced £15.69 at the time of this review
Linda W.
Reviewed in Canada on April 25, 2025
I don’t know where it originated but I have a fascination with the look of figgy puddings. I’ve been wanting to create figgy pudding decorations for my Christmas tree and for around the house for years now but wasn’t sure where to begin or what to use.This foam sheet from Do²ping is absolutely PERFECT. The sheet is 49” long and almost 14” high. This generous amount of foam gives me lots of material for all potential sizes. I want to make 3D, textured figgy puddings. I have white, green and red felt which I will cut into fondant shapes with wavy edges, leaves and berries but this rich coloured brown foam will be the base of every pudding decoration that I plan to make.The foam is easy to work with and can be cut with scissors or a blade. I prefer scissors because I have more control while cutting. It is 6mm thick so it provides a firm, sturdy base upon which to create my mini masterpieces. I am considering using it as the base to make some fruitcake ornaments as well.Priced at $20.69 (April 2025), I feel this is a very reasonable price for 49” of foam.Item reviewed: Do²ping Brown Eva Foam Sheets roll, 6mm eva Craft Foam 49''x13.9'' High Density 86kg/m3 for Cosplay**I include the item reviewed original listing in the event that the listing is changed over time.My rating system (as of April 2025)⭐⭐⭐⭐⭐ = Knocked my socks off and exceeded all my expectations⭐⭐⭐⭐ = Excellent product, is as described, no hesitation in recommending⭐⭐⭐ = Good product with some issues, would still recommend⭐⭐ = Major issues and problems, hesitate recommending⭐ = Cannot recommend at all
Grayson
Reviewed in the United States on April 24, 2025
I've used a lot of EVA foam, and this seems good. I got the 2mm thickness, which is a little too thin for most things but good for adding details. This stuff is pretty high quality. I haven't tried to paint it yet, but I don't notice any large surface defects that would cause a problem. It is super lightweight. Since the roll is long and wide, this is a better pick than those horrible foam sheets from the dollar store (or similar) which are only squares and have poor surface finish. I recommend keeping one or two around if you use EVA foam often!
rkmommy
Reviewed in the United States on April 21, 2025
The media could not be loaded.
Recommended Products