Shopping Cart

Your cart is empty.

Your cart is empty.

ETCR3670 Transformer DC Resistance Tester 24V/10A AC/DC Power 5' Touch Screen Built-in Printer Transformer Windings Insulation Resistance Meter 1.0uΩ-50.00kΩ

5.0 Write Review
Free shipping on orders over $29.99

$850.00

$ 99 .00 $99.00

In Stock

About this item

  • ETCR3670 Transformer Winding DC Resistance Meter is used for fast measurement of various transformer windings DC resistance and conductor DC resistance measurement.
  • The tester has two power supply modes: AC 110V-240V and built-in large capacity lithium battery, which can meet the requirement in various sites.
  • Two measurement modes: automatic measurement mode: the test current can be automatically selected according to the load; Manual measurement mode: 7 gears test current can be choose.
  • The maximum output voltage is 24V, the maximum test current is 10A, and the test speed is fast, which can be applied to various transformers and other resistance measurements.
  • Equip with 5-inch true-color LCD touch screen, which is dual-purpose for measuring and operating with touch screen/press buttons. With built in printer, and USB interface.
  • With automatic discharge function, with 75° conversion resistance function, which can compensates for the material temperature of the tested object.
  • Resistance measurement range: 1.0uΩ-50.00kΩ


Product Description

ETCR3670 Transformer DC Resistance Tester

Product Overview

  • ETCR3670 Transformer DC Resistance Tester is used to quickly measure the DC resistance of various transformer windings. Semi-fnished products and finished product factory test, installation, handover test and preventive test of the power department in transformer manufacturing are mandatory test items, and the tester can effectively find the material selection, welding, loose connection parts, lack of shares, broken wires and other manufacturing defects and hidden dangers after operation of transformer windings.
  • ETCR3670 Transformer DC Resistance Tester consists of host, test line, temperature sensor and USB communication line, etc. The instrument adopts with the microprocessor technology and precision 4-wire method to test, accurate and reliable. The instrument with two power supply modes, AC 110V-240V and large capacity lithium battery; Two measurement modes, automatic measurement and manual measurement. The instrument has the function of converting resistance at 75℃ to compensate for the temperature and material of the test product. The instrument adopts with 5 inch full-color high definition touch screen with backlight adjustment function, which is clearly visible under strong light, also equipped with waterproof protective box, which is anti-collision, anti-fall, waterproof, strong, safe and durable. With built-in printer and USB interface. The instrument has the functions of automatic discharge, alarm, clock and automatic shutdown, etc, which is the ideal tester for quickly measure the DC resistance of the transformer.
ETCR3670

Product Features

  • Two power supply mode AC 1100V-240V and large capacity lithium battery, meeting the requirement of user on various occasions.
  • Two measurement modes. Automatic measurement mode: the test current can be automatically selected according to the load; Manual measurement mode: There are 7 gears to test current
  • Test current gears: AUTO, 10A, 5A, 1A, 100mA, 10mA, 1mA
  • Max. output voltage is 24V, the max. test current is 10A, fast-speed testing, and it can be applied to transformer measurement.
  • With discharge function, which is automatically discharged after the test, and the discharge instructions are clear to avoid misoperation.
  • The function of converting resistance at 75℃ to compensate for the temperature and material of the test product.
  • Alarm function, can set the resistance alarm threshold.
  • Memory: data storage 600 groups
  • 5 inch true-color touch screen
  • Built-in printer
  • USB communication interface

ETCR3670 Technical Specifications

Power Supply AC 110V-240V & Built-in rechargeable lithium battery DC 22.2V 5200mAh
Display Mode 5 inch true-color LCD touch screen, resolution 480×854
Backlight Adjustment Drag the slider to adjust the brightness
Measurement Range 1.0uΩ-50.00kΩ
Test Current & Accuracy Check the table above
Max. Resolution 0.1uΩ
Test Current Gear AUTO, 10A, 5A, 1A, 100mA, 10mA, 1mA
Output Voltage 24V MAX
Measurement Method Precision four-wire method, 2 A/D simultaneous detection
Measurement Mode Automatic, manual
Wire Length Test L: ≤9999m
Standard Wire Length Standard wire length setting range: 1m-200m
Temperature Measure Range -55℃-125℃
Temperature Measure Accuracy ±0.5℃
Test Time Sampling AD rate 1 second/time
Alarm Setting Setting alarm threshold range:1mΩ-2500Ω，the alarm function is not activated at 0Ω
Alarm Prompt When the test value exceed the set value of the alarm, the buzzer will sound and the alarm will prompt
Overflow Display Overrange overflow function: digital 999999 overrun display
Charging Indication The indicator light on the charger light up red when charging, and green when fully charged
Low Voltage Indication When the battery voltage is lower than DC 22.2V, the battery level symbol is displayed in red, reminding charging in time.
Memory 600 groups (no data will be lost if the battery is powered down or replaced)
Data Hold Automatically keep displaying the tested result after each test
Clock Function 24-hour clock, showing hours, minutes, and seconds
Calculation Reduced Resistance Convert based on the temperature and material of the tested product.
Discharge Function Automatic discharge after testing, with clear discharge instruction to avoid misoperation
Automatic Shutdown After setting the automatic shutdown, it will automatically shut down after 15 minutes of no operation
Host Size 280mm×260mm×160mm
Weight The instrument: About 3250g (include battery); total weight: about 6.4kg (include accessory)
Printer Built-in printer
USB Interface With USB interface, software monitoring, storage data can be uploaded to computer, save and print.
Accessories Tester: 1PCS; Power line: 1PCS; Test wires(10meters): 2PCS; Earth line: 1PCS; Charger: 1PCS; Temperature sensor; 1PCS; USB communication cable: 1PCS; 3.75mΩ standard resistance: 1PCS; Tool bag : 1PCS; Print paper: 1roll