Your cart is empty.
Your cart is empty. Specification:
Condition:New
Color: Black
Material:Plastic
To Control: Transfer Case
Placement on Vehicle: Front
Pin Number:7
Other Part Number:AL3Z-14B166-BA, AL3Z14B166BA, AL3 Z14 B16 6BA
Dimension:5.9x7.7cm/2.3''x3.0''(W*H)
Reasonable choice of driving mode can avoid costly road rescue. Replace the old differential lock switch, cope with various road conditions at any time!
This is a non-OEM product,accessory only.
Fitment:
for Ford F-150 2010-2014
for Lincoln Mark LT 2010-2014
Different Models:
2H is ideal for normal, everyday driving. Use 2H for dry, flat, paved roads.
4H is your go-to setting for driving at normal speeds (30 to 50 MPH), but with additional traction. Use this setting when driving on hard-packed sand, ice or snow covered roads, and dirt roads.
4L is suited for a time when you need and power. Use 4L when driving in deep mud or snow, soft sand, up steep inclines, and on extremely rocky surfaces. Stick to low speeds in this setting, around 10 MPH.
Installation:
Gently pull out the front part, remove the screws together and you'll see the back end.
Pry three small holes with a small flat-head screwdriver, then pull out the switch and you should see a connected harness.
Unplug the harness from the old switch.
Connect the new switch to the wire harness and press in (note: insert the switch after alignment to avoid deflection when the buckle is wrong).
Package:
1 x Control Switch Knob