Shopping Cart

Your cart is empty.

Your cart is empty.

for iRobot Braava Jet M6 Battery Replacement, ABL-C 3INR19/65 Rechargeable Li-ion Batteria Compatible with Braava M612880 M612680 M614480 Robot Mop Capacity 12.3V 22Wh

Free shipping on orders over $29.99

$39.99

$ 19 .99 $19.99

In Stock

About this item

  • Compatible Models: Fit for Jet M6 Series M612880, M612680, M614480 robot mop battery replacement, battery type ABL-C 3INR 19/65. (If you are unsure of the robot model, click "Ask a Question" for help.)
  • Upgraded Version: OEM manfacturer standard, made of higher quality battery chip and higher performance battery cells, which provides more reliable charge and discharge protect, effectively extending the lifespan of robots that is a better choice than the others
  • Save Your Robot: If you are still struggling with your robot not being able to finish the cleaning job always running out of battery in the middle; if you are still struggling with your robot needing to be recharged and not being able to clean thoroughly and powerless. Go get a new battery for your robot!
  • Safe to Use: All batteries have passed UL, CE, FCC, RoHS safety certifications, can provide up to 1000+ charge cycles and support fast charging, with over-charging and discharging circuit protections, which can effectively extend the working life
  • Battery Support: We provide 60 days refund; 90 days free replacement with new; 24-hour email support. We are committed to solving all quality problems, please rest assured



Product Description

for iRobot m6 battery
High Performance 10.8V=19Wh 1775mAh

for iRobot ABL-C 3INR19/65 Battery Replacement

Compatible Robot Mop Models:

  • For Braava Jet M6 Series M611020.
  • For Braava Jet M6 Series M612880.
  • For Braava Jet M6 Series M612680.
  • For Braava Jet M6 Series M614480.
for braava battery
abl-c battery

Step 1: Upside down the Roomba.

Step 2: Use the screwdriver to remove the screws that secure the battery cover.

Step 3: Lift the side plastic handles to remove the old battery.

Step 4: Align the sides and put the new battery into.

for braava jet m6
for Roomba 670 battery

When Should I Need a Replacement New Battery?

1. When the working time of full battery is less than 45 minutes.

2. When the battery turns green within charging for about 30 minutes.

3. When the device prompts you to charge the Roomba but can not return to the base to charge properly.

for Roomba 671 battery

Battery Exception Notes:

1. The battery can work for 2-3 hours in full charge. But the robot will back to the base about 60 mins after working in a normal set. It does not mean that the battery power has been exhausted

2. On the iRobot panel, err5 is displayed as a battery problem. Err7 is not entirely the battery problem.

Error Code 1/5/10 Reason: Wheels jammed or wheels not touching the floor. Solution: Check the wheel to make sure it works, and place it on the floor.
Error Code 2 Reason: The main brushes won't rotate. Solution: Remove and clean the brush, brush frame and side caps at both ends.
Error Code 6 Reason: The drop sensor was dirty. Solution: Wipe the drop sensor with a dry cloth, then put the robot in a new clean place to restart it.
Error Code 8 Reason: The vacuum fan or filter be stucked by dust. Solution: Remove and clean the trash box and filter.
Error Code 9 Reason: The snubber is dirty or get stucked. Solution: Clean the inside garbage of the snubber.
Error Code 11 Reason: The Internal error. Solution: Press and hold the "Clean" button about 10s untill restarted.
Error Code 14 Reason: The trash box is not connected properly. Solution: Remove the trash box and clean the trash box sensor then reinstall it.
Error Code 15 Reason: The system error. Solution: Press and hold the "Clean" button about 10s untill the lights off. Release the button You will hear a piece of music and then click “Clean” to restart it.
Error Code 16 Reason: Encountering obstacles or the “Clean” button is be pressed during cleaning. Solution: Place the robot on groud and click “Clean” to restart it (Please do not click the “Clean” button when operation)
Error Code 17 Reason: The robot is unable to do its job because of a barrier along its route. Solution: Make sure there is enouahlight in the room for Roomba to navigate. Don't have too many cluther inthe house. Make sure Roomba doesn't knock the shut door to casuse close its route. Wipe the window on the top of the machine and the sensor on the bottom of the mechine with a dry cloth.
Error Code 18 Reason: The robot can't go back to the charging station. Solution: Make sure there are no obsfacles in front of the charaing base, and wipe the metal connector between the charging socket and the machine.

Recommended Products