Shopping Cart

Your cart is empty.

Your cart is empty.

GLOTRENDS PU13 U.3 to PCIe 4.0 X4 Adapter for 2.5 Inch U.3 SSD, PCIe 4.0 X4 Full Speed

Free shipping on orders over $29.99

$14.99

$ 7 .99 $7.99

In Stock

About this item

  • U.3 to PCIe 4.0 X4 Adapter: It allows you to install a U.3 SSD into the U.3 (SFF-8639) slot by converting one PCIe X4/X8/X16 slot on the motherboard.
  • FCC and CE certified, Highly Reliable, and Stable PCIe X4 Full Speed: The U.3 SSD speed is unaffected, just as if it was installed on the motherboard
  • No limit to the capacity of the U.2 SSD: Support 4T/6T
  • To reach PCIe 4.0 X4 (64Gbps) full speed, the CPU and motherboard PCIe slot and PCIe M.2 SSD should all be PCIe 4.0 features (Note: PCIe 4.0 is not supported on Intel CPUs below 11th generation)
  • Support OS Booting: Reinstall the OS, and set up BIOS/UEFI boot from this M.2 NVMe SSD (Note: Some motherboards are too old to support OS booting. In this case, U.2 SSD can be used as storage disks)
  • OS compatibility: Plug-and-play in Windows 11/10/8/Linux/Mac OS (Note: Not support Windows 7). The new U.2 SSD needs to be initialized and formatted before it can be recognized by the computer host.



Product Description

Model: PU13

Internal Interface PCI-Express X4
External Interface U.3
Max Bandwidth 8GBps for PCIe 4.0/ 4GBps for PCIe 3.0
OS Compatibility Windows/Linux/Mac OS (Not Support Windows 7)
U.3 PCIe Adapter

U.3 SSD as boot drive or storage drive?

For U.3 boot drive, you need to reinstall the OS (windows 10 64bit/Windows 11 is recommended).

  • First you need to prepare a bootable usb drive and OS (windows 10 64bit/Windows 11).
  • When reinstalling the system, please select GUID Partition Table (GPT).
  • OS will reboot after completing installation, remove the bootable usb drive, enter BIOS to setup UEFI boot mode

For U.3 storage drive, Plug and play in Windows 11/10/8/Linux/Mac OS

  • Windows 7 can not support nvme drive
  • Brand new NVMe drive need to be Initialized and formated before OS recognize it.
U.3 PCIe Adapter
U.3 PCIe Adapter

PCI-Express X4 Full Speed

  • To reach PCIe 4.0 X4 full speed, your motherboard and CPU, and U.3 SSD should all support PCIe 4.0, otherwise can not reach PCIe 4.0 X4 full speed
  • To be Noted: Intel CPU 11th generation and above support PCIe 4.0 feature
U.3 PCIe Adapter

Package Includes

  1. PU13
  2. Screwdriver
  3. Screws for U.3 SSD mounting
  4. Screws for bracket mounting to PC

William Axsom
Reviewed in the United States on March 30, 2025
PCIe storage/memory looks to be getting more popular - or in demand, maybe, it was just a handful of years ago that an I.T. tech guy here in town told me such couldn't be used on my PC desktop. I just recently installed 2TB NVMe SSD on an adapter so that is no longer the case. I got this for the custom-build ITX project that's in the works, novel components, etc. catch my curiosity quite readily; because the whole build/refurb/restore computers thing is same as brand new in my bubble, I've little to no reservations about trying out stuff, quite often I simply don't "know better," or not. This came with only the taller, full-size bracket where it probably should have had both, although my chassis will fit this one, nor is it usually terribly difficult to score and use the other size. It is all plug-and-play simple really, the most difficult thing may be in the BIOS settings to tell the PC to recognize it. If one doesn't have space to add in another 2.5" SSD, this is certainly a very affordable option for a work-around.
Wilson
Reviewed in the United States on March 30, 2025
I've been curious about the new U.3 drives, and thought I'd first try this adapter with a sata ssd (the U.3 port should be backward compatible with sata ssds, though much slower). Unfortunately my older PC would not recognize this adapter & drive. I don't know what the problem is, but I can't rule out my older motherboard.
Undaunted LLC
Reviewed in the United States on March 29, 2025
Unfortunately, this adapter was dead on arrival. I tested it with three known good solid-state drives—two hard disk drives and one solid-state drive—but none were recognized. Since the packaging arrived in perfect condition with no visible damage (as shown in the photos), this appears to be a manufacturing defect rather than shipping damage. I even attempted to reformat the drives, but they weren’t detected by the OS at all.Installation was very straightforward. The AIC came with M.2 screws for securing the drive and additional screws for mounting it in a case. Both the drive and the card itself slotted into the PCIe slot effortlessly. However, I did notice that the metal bracket was slightly bent right out of the box, which is also shown in the photos.Even with an easy installation, a product that doesn’t function is a complete failure. Because of that, I have to give it a one-star rating.
野村
Reviewed in Japan on March 11, 2025
UltraStar DC SN655で使用を想定していましたが動きませんでした。他社製のU.2やU.3のアダプタで上記SSDが問題なく動いたので多分コレが原因でした。あまりお勧めはできません。
neokey GbR
Reviewed in Germany on January 17, 2025
Ich habe diesen Adapter und den .....8639UE von StarTech bestellt. Die U.3 SSD macht mit dem Startech 2560MB/s und mit dem Glotrends leider nur 1740. Ja der Startech ist fast 4x so teuer, aber wenn ich mir eine U.3 kaufe will ich auch den vollen Speed.
Maravilla
Reviewed in the United States on April 7, 2025
I have purchased quite a few different GLOTRENDS PCIe products in the past, but they have been for NVMe instead of for 2.5" SSD.This PCIe card allows you to add a SATA SSD 2.5" using PCIe lanes for maximum speed. Therefore, you should consider purchasing the best 2.5" SSD available. For me, I would recommend Samsung PRO or EVO model of SSDs. They are incredibly cheap these days. I did have some EVO SSDs lying around so I am using them for my home server.The speed is fantastic, there is full speed support as opposed to limitations with some SATA buses. Note that this occupies PCIe lanes so if you are using many PCIe products this may cause an issue, but for most, it won't.I'm really happy with this product because of how easy it is to add 2.5" SSD to my server rather than having to buy additional spinning hard drives which are slower and NVMEs which cost more.
customer
Reviewed in the United States on April 5, 2025
I've had these U.2 drives for a while now and never thought I'd be able to use any of them until this showed up. I was skeptical that this would work with this comparatively older Intel board that I use for Proxmox. It was recognized right away and I was able to deploy it in Proxmox to expand my storage for two VMs to share - a Debian client with qbittorrent as a seedbox and a Windows client with AgentDVR for NVR. It just works.
Dylan
Reviewed in the United States on April 30, 2025
This works fine, holds drives securely, and fits properly. The only complaint is that I would like to see some shielding for the pcie lanes. But other than that, I have no complaints.
Mike
Reviewed in the United States on April 2, 2025
Can be troublesome getting it to work right the first time. Not all motherboards like this device, took me a couple before finding one that recognized it. Possibly due to chipset used? Once installed, I noticed the drive speeds were lower than claimed. Definitely usable, but not as fast as it should be. I took off a star for performance and compatibility.
James Caswell
Reviewed in the United States on April 10, 2025
Solid manufactured card. I have only used in PCIe 4.0 X4. Multiple OS compatibility. Can be set to bootable drive. Works as described. Completely satisfied with this card.