Your cart is empty.
Your cart is empty.
Preparation for Operation:
1. Confirm the safety protection measures.
2. Check if the machine is 110VAC and make sure that the pressure will not fluctuate.
3. See if the temperature of the plastic bucket is set at about 302°F(different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier).
4. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.
5. Check if the air supply system is basically dry and the air pressure is stable
6. Power on and test the circuit of each part.
7.
Boot Steps:
1. Connect the power and turn the power switch to “ON”.
2. Check if the temperature of the temperature controller is within the above range.
3. Check whether the pressure relief is turned in the direction of pressure holding.
4. Connect the origin, set the pressure value, and start the operation.
Shutdown Steps:
1. Release the foot switch to cut off the main power
2. Disconnect the air pipe, or adjust the pressure regulating valve of the filter cup to 0.
Specification
Color: Blue
Model: YT-X001
Material: Iron and Aluminum
Surface Treatment: Painted, Sprayed with Teflon
Style: Modern
Shape: Rectangular
Number of Items: 1
Assembly Required: Yes
Mount Type: Countertop
Voltage: 110V 10A
Plug Model: PSB-10
Max Power: 1250W
Max Voltage: 10A 125V
Sol Speed: 3kg/h, 6.61lbs/h
Solvent Capacity: 3kg/h, 6.61lbs/h
Maximum Viscosity: 10000 CPS
Plug Type: US Standard
Power: 800W
Working Temperature: Over 150°C/302°F
Temperature Control Range: 150-200°C/302-392℉
Pressure Range: 4~10kg/8.82~22.05lbs
Length of Power Cord: About 2m/6.56ft
Package Included
1* Hot Melt Glue Dispenser
1* Pedal Switch
1* Conversion Plug
1* Pressure Gauge
