Your cart is empty.
Your cart is empty.Product Description
HOTECHE ELECTRIC BRAD NAILER,2 IN 1 NAILER/STAPLER WHICH IS COMPATIBLE WITH GA 18 5/8”-1-1/4" BRAD NAILS & 5/8”-1" STAPLES
The Hoteche electric 2 in 1 nail gun/staple gun is intended for stapling and nailing of carboard,insulating material,fabrics,foils,leather and similar materials on surfaces of wood or materials similar to wood,which is including 500pcs of 5/8-inch 18 Gauge Brad Nails, 500pcs of 1-inch 18 Gauge Brad Nails, 500pcs of 3/4-inch Staples and 500psc of 1-inch staples
Brand Story
- Hoteche has 20-year experience of tools, covering thousand kinds of hand tools, power tools, garden tools, air tools, welding tools and so on.
- With years development, Hoteche owns more than 1000 reliable suppliers in China and cooperates with more than 200 clients all over the world.
- With the concept of “expanding wider variety, developing higher quality, and pursuing better service”, Hoteche is looking for more new markets and eager to create value for more clients.
NEW HOTECHE 12 Amp 110-120V-50/60Hz P802208A 2 IN 1 BRAD NAILER/STAPLER
The adjustable depth control knob allows the operator to set the correct amount of power according to the different hardness wood materials.The brad nailer/stapler features safety tacker head,marks for staples length,6 feet long bold wires that is high temperature resistance and oxidation resistance.
- Impact adjustable
- Contact safety switch depress to fire
- Side loading of staples/nails
- Anti jam mechanism
What will you get
- 1pc 2 In 1 Stapler/Nailer
- 500pcs 90 serles staple(5/8-Inch)
- 500pcs 90 series staple(1-Inch)
- 500pcs F series nail(3/4-Inch)
- 500pcs F series nail(1-Inch)
- 1pc Hex key
- 1 user manual
Features
WIDE RANGE of USES
The 2 in 1 electric nailer/stapler is great for home repairs,wood trim and lattice work,upholstery,carpentry,and DIY works.
NAIL LENGTH DISPLAY
Accurate display of different lengths of nails for quick comparison of nail lengths without loading the wrong nails.
TWO HANDS OPERATION
We suggest that two-handed operation which will assist in better penetration strength.
NON-MARRING NOSE TIP
The nose tip is covered with a soft silicone cover that protects the nose tip from damage to the wood.
LEVER FOR LOADING MAGAZINE
Press the lever to release the loading magazine quickly,it makes load more efficient and convenient.
SOFT GRIP HANDLE
The handle is made of silicone material,which is soft and comfortable even you hold for a long time.
Suggestions for using staple/nails
High Hardness:
- Beech Wood
- Oak
Medium Hardness:
- Medium Density Fiberboard
- Solid Wood
Low Hardness:
- Pine
- Plywood
- Cedar
High Hardness:
- Beech Wood
- Oak
Medium Hardness:
- Medium Density Fiberboard
- Solid Wood
Low Hardness:
- Pine
- Plywood
- Cedar
High Hardness:
- Beech Wood
- Oak
Medium Hardness:
- Medium Density Fiberboard
- Solid Wood
Low Hardness:
- Pine
- Plywood
- Cedar
Low Hardness:
- Pine
- Plywood
- Cedar
High Hardness:
- Beech Wood
- Oak
Medium Hardness:
- Medium Density Fiberboard
- Solid Wood
Low Hardness:
- Pine
- Plywood
- Cedar
Medium Hardness:
- Medium Density Fiberboard
- Solid Wood
Low Hardness:
- Pine
- Plywood
- Cedar
Low Hardness:
- Pine
- Plywood
- Cedar
Low Hardness:
- Pine
- Plywood
- Cedar
Note: In order to make it easier for the nails to be driven into the board, it is strongly recommended to operate with both hands.
POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Ensure the switch is in the off position before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
$154.99
$ 71 .99 $71.99