Shopping Cart

Your cart is empty.

Your cart is empty.

Hydraulic Log Splitter Pump Kit 13GPM 2 Stage Pump 3000PSI 1/2' Shaft Wood Splitter Pump Hydraulic Log Splitter Kit

5.0 Write Review
Free shipping on orders over $29.99

$69.99

$ 26 .99 $26.99

In Stock

About this item

  • [Applciation] - This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. 85% efficient. Suggested applications: Presses, Log Splitters, Clamping Units.
  • [High Quality] - The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements.
  • [Hydraulic Log Splitter Pump] - New Hydraulic Log Splitter Pump 13 GPM; Shaft: ½"; Inlet port: 150mm; Outlet port: 230mm; Minimum 8 HP or larger gas engine.; For use with open center hydraulic systems only; Maximum pressure: 3000 PSI; Rated speed (r/min): 3600
  • [Specification] - Bolt circle: 2.83in; 4 holes spaced 2" on center; Mounting hole diameter: 344in; Woodruff key: 1/8in; Displacement (ml/r): 10.9/3.6; Large pump rated pressure (MPa): 2.5; Small pump rated pressure (MPa): 20; Rotation is clockwise
  • [Best Service] - If you have any questions, please contact us. We will reply your within 24 hours.


Description

The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient.

Suggested applications: Presses, Log Splitters, Clamping Units and Compacto


Specifications:

New Hydraulic Log Splitter Pump 13 GPM

Shaft: ½"

Inlet port: 150mm

Outlet port: 230mm

Minimum 8 HP or larger gas engine.

For use with open center hydraulic systems only

Maximum pressure: 3000 PSI

Bolt circle: 2.83in.

4 holes spaced 2" on center

Mounting hole diameter: 344in

Woodruff key: 1/8in

Displacement (ml/r): 10.9/3.6

Large pump rated pressure (MPa): 2.5

Small pump rated pressure (MPa): 20

Rated speed (r/min): 3600

Rotation is clockwise


This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. 85% efficient.

The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements.


Packing Include:

1 PC 13 GPM Hydraulic Log Splitter Pump