Your cart is empty.
Your cart is empty.This UCP PILLOW BLOCK MOUNTED BEARING consists of an INSERT BEARING and a CAST IRON housing. The INSERT BEARING has Triple-Lip Seal: Unmatched protection in highly contaminated environments. Ensures significant bearing lifespan in severe dust, sand, slurry, and water. Bearing is Pre-Lubricated with High-Quality Grease, ideal for use in High and Low-temperature settings. Has a Set Screw Lock on its surface for securing the shaft. The PILLOW BLOCK can be mounted on levelled surfaces using the Two Bolt Holes. Grease Fitting Offset on top to Relubricate the bearing. - Specification: Item UCP206-20R3, Series UCP200, Bearing Number UC206-20R3, Housing Number P206, Bearing Bore Diameter Metric 31.75 mm, Bearing Bore Diameter Inch 1-1/4 in, Bearing Width Inner Ring Matric 38.10 mm, Bearing Width Inner Ring Inch 1.500 in, Bolt Size 1/2 in Number of Bolts 2, Bolt Hole Center to Center (e) Matric 121 mm, Bolt Hole Center to Center (e) Inch 4.764 in, Overall Length (a) Matric 165 mm, Overall Length (a) Inch 6.496 in, Overall Height (w) Matric 84 mm, Overall Height (w) Inch 3.307 in, Overall Width (b) Matric 48 mm, Overall Width (b) Inch 1.890 in, Mounting Surface to Shaft Center (h) Matric 42.90 mm, Mounting Surface to Shaft Center (h) Inch 1.689 in, Dynamic Load Rating Cr 19500 N, Static Load Rating Cor 11200 N, Limiting Speed 6300 r/min, Bearing Clearance Normal, Bearing Sealing type R3 Triple-Lip Seal, Lubrication Type Grease Shell RL2, Lubrication Temperature -20°C to +160°C, Rolling Element Indicator Ball, Bearing Material Gcr15, Housing Material H200 Cast Iron, Locking Type Set Screws, Weight 1.140 KG.
