Your cart is empty.
Your cart is empty.Product Description
Remote Tape Switch Mounting Plate
Remote switch wire across through the pressure mounting plate. Easy to use, durable and impact resistant. It Make your pressure switch more secure when installed.
Wide range of use
Adjustable length of pressure switch according to the length of the switch. Accepts switches 0.62 in wide and any length.
Easy to install
Compatible with the mlok system, with a hex key for easy installation.
Best choice
2 pieces rounded design, lightweight, 0.5 oz.
Feature
- Material-Aluminum.
- Weight-0.03 bl
- Widely used
- Fits on any MLOK compatible system
Pakage List
- 1x Mlok Pressure Switch Mount Plate
- 1x Allen Key
tm260AI
Reviewed in the United States on August 11, 2024
Picture shows cap screws that sit flush inside of the counterbore, which would be fine if they actually sent those screws. The screws that were shipped are 100 deg Flat head so their head binds as soon as they scrape off the thin anodizing and seize. I replaced the wrong screws with pan head screws and had M-LOK nuts that fit the larger thread, had to bore out the hole to make them fit. Over all, I should not be surprised with a cheap China part but its still disappointing.
Huy Trần
Reviewed in the United States on June 20, 2024
Ordered it for my rifle but doesn’t fit a common pressure switch even after cutting the edges off. Fit perfectly on my rifle with mlok.
Darius
Reviewed in the United States on February 27, 2024
The screw for the MLOK is in the way of the chord so it wont pass through . It also wont lock onto my rifle. Ive even used spare screws and locks and still wouldnt work with this product. Dont recommend
Review69
Reviewed in the United States on April 15, 2024
Comes out of alignment easy when mounting. Cheap screws and nuts, feels like they will strip or break, too small to be proper m lok, I feel these may gouge a handguard when mounted. The m lok mounting index area is also too thin and shallow, definitely out of spec. Buy something name brand that is in spec for the same price or less.
Probably not bad for airsoft
Reviewed in the United States on April 1, 2024
Barely attempted to tighten the end piece and the screw started to embed itself into the metal of the cap, making it impossible to tighten. I have no idea how that happened as I didn’t over tighten anything enough to be usable. Front piece went on perfect no issues.
Brando banks
Reviewed in the United States on April 18, 2023
Fit tape switch perfect
Jojo DFB
Reviewed in the United States on December 18, 2022
The quality seems great; however, it is not large enough to retain my switch. I wish they would make something larger that would fit, because besides the fit it’s exactly what I wanted. I would warn you to measure your switch before buying any mount and insure that it will work before you purchase it.
NRL
Reviewed in the United States on December 17, 2022
This tape switch mount is basically what I was looking for. Have an inexpensive light for a airsoft replica. With the Magpul carbine length hand guard it hung over all 3 mounting points and had to move the QD mount on the bottom. Mid length there is plenty of room and probably not going to be an issue with a free float M-LOK system. Holds the switch in place, seems well made and happy with the setup. I would recommend this if you have a tape switch of varying length.
Recommended Products
$149.95
$ 69 .99 $69.99