Your cart is empty.
Your cart is empty. Misting Set Specification:
- Material: PE Hose
- Color: Black
- Nozzle material: brass
- Orifice diameter: 0.3mm
Pump Specification:
- Voltage: DC24V
- Pipe diameter: 6mm
- Work pressure: 70PSI
- Work current: ≤1.0A
- Work flow: ≥0.8L/min
- Greatest pressure: 130PSl+10
- Maximum current: ≤1.5A
- Temperature: ≤30°C
- Noise≤50dB
Features:
- Equipped with a 24v silent small pump, the atomization is more sufficient;
- Nozzles are drip-proof;
- Perfect for cooling your outdoor living areas, without getting your yard wet;
- Can be widely used in plant humidification, cooling, dust reduction, landscaping, salt spray test and other artificial fog.
- The system is simple, the spray point is fine, the atomization is sufficient, energy and water saving, low cost and fine effect.
Installation Steps:
1. Connect the adapter to the water tap.
2. Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities.
3. Using cable tie to fixed the pipe.
4. Turn on the tap slightly until jets are working, enjoy the cooling misting system.
5. Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time.
6. It is recommended that the coolant system be installed at the height of 2.5m-3.0m.
