Your cart is empty.
Your cart is empty. The diy clock mechanism replacement Kit is a good replacement. suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock,12888, etc. Suitable for repairing, replacing, and also suitable for diy various styles of the clock frame.
Specification
Material: Plastic, Quartz, Aluminum , Metal
Battery Type: AA Carbon Battery (Not included)
Thread Length: 5 mm / 0.2 inch
Mechanism Shaft Length: 12 mm / 0.47 inch
Mechanism Box Size: 56x 56 x 16 mm/ 2.2x 2.2 x 0.63 inch (L*W*T)
Suitable for Clock Face Thickness: 2-3 mm / 0.078-0.12 inch
Length from hole to needle tip:
Hour hand-Minute hand-Second hand:68mm / 2.68" ; 92mm / 3.62" ; 87mm / 3.43"
Advantage
1.Mute clock mechanism: The clock movement adopts a super silent scanning design, and the scanning clock movement has no noise, providing a quiet environment for your sleep.
2.Time accuracy: The error in a day is within 1 second. This clock mechanism battery operated is low power consumption, only 1 AA battery is required (not included).
Instruction
1. Insert the movement into the clock face slot;
2. Install the washer and nut in the movement shaft;
3. Place the hour hand, minute hand, and second hand at the twelve o'clock position in order.
NOTE: 1. Please check the size of the battery clock mechanism for your purchase to verify whether it can fit over your clock; 2. Do not use excessive force when installing, or it will bend.
CAVE MAN
Reviewed in the United States on May 4, 2025
i was happy with it while it worked it was quitekept time accurately for 3 monthsand then just quit .
Customer
Reviewed in the United States on March 1, 2025
Worked just fine out of the box, Very fast deliveryThank youRichard
Ted Hawley
Reviewed in the United States on February 28, 2025
Works great. I recommend if you need a replacement.
sbulldog
Reviewed in the United States on January 25, 2025
Came quickly and works like it should
Customer
Reviewed in the United States on April 8, 2025
Great mechanism! No instructions were included but was easy to install.
Customer
Reviewed in the United States on April 25, 2025
Excellent
Jesse
Reviewed in the United States on April 18, 2025
Bought to replace inop movement of older wall clock. Shaft was canted to one side by about 10 degrees so hands ended up high on one side of the clock face and low on the other. Decided to use anyway but had trouble making sure hands did not drag on clock face or on glass cover. Will not buy again from this seller!
Wil
Reviewed in Canada on April 16, 2025
My 6 years old clock's part stopped working, this was a nice and low cost fix. Very easy to install and was back working in minutes (pun intended).
tecjunkie
Reviewed in the United States on April 12, 2025
My wife can’t stand minor noises like the tick of the second hand on a clock, so I ordered this to silence a new wall clock and it works perfectly.
Recommended Products
