Your cart is empty.

Performance Heavy Duty Stage 4 Complete Clutch Kit Set (1MD) Compatible with Acura RSX TYPE-S 2002-2006 / Honda Civic SI 2006-2011 2.0L DOHC (K20A2 K20Z3)

5.0 Write Review

Free shipping on orders over $29.99

$383.96

$ 99 .00 $99.00

In Stock

Qty.:

𝐏𝐑𝐄𝐌𝐈𝐔𝐌 𝐂𝐋𝐔𝐓𝐂𝐇 𝐘𝐎𝐔 𝐂𝐀𝐍 𝐅𝐄𝐄𝐋 𝐀𝐍𝐃 𝐓𝐑𝐔𝐒𝐓: A new definition of an affordable performance clutch is being introduced by Action Clutch. It is really the highest quality and value available. Clearly. To guarantee the best quality and satisfaction, Action Clutch designs, engineers, assembles, tests, and inspects every product in the United States.
𝐇𝐎𝐑𝐒𝐄𝐏𝐎𝐖𝐄𝐑 𝐑𝐀𝐓𝐈𝐍𝐆 𝐀𝐍𝐃 𝐓𝐎𝐑𝐐𝐔𝐄 𝐂𝐀𝐏𝐀𝐂𝐈𝐓𝐘: 360 HP / 325 lb-ft, Suitable for off-road use, track use, performance street driving and minimal daily use.
𝐊𝐈𝐓 𝐈𝐍𝐂𝐋𝐔𝐃𝐄𝐒: Performance HD Pressure Plate, Performance Stage 4 Ceramic 6-Puck Rigid Disc (8-1/2" x 1-1/32" x 24 spline), Single Diaphragm HD Pressure Plate, MIBA Ceramic Unsprung 6 Puck Clutch Disc, Premium Throwout Bearing, Premium Pilot Bearing, Clutch Alignment Tool
𝐋𝐈𝐌𝐈𝐓𝐄𝐃 𝐖𝐀𝐑𝐑𝐀𝐍𝐓𝐘: All Action Clutch products comes with excellent customer support and limited manufacturer warranty of 12 months or 15,000 miles that covers issues related to performance, fitment and function. Buy with confidence!
𝐓𝐇𝐄 𝐅𝐎𝐋𝐋𝐎𝐖𝐈𝐍𝐆 𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐈𝐒 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐁𝐋𝐄 𝐖𝐈𝐓𝐇: Fits Acura CSX TYPE-S 2007-2010 (2.0L DOHC 4cyl; 6-speed; Canadian model), Fits Acura RSX TYPE-S 2002-2006 (2.0L DOHC 4cyl K20A2, K20Z1, 6-speed), Fits Honda Civic Si 2006-2011 (2.0L DOHC 4cyl K20Z3, 6-speed)

Action Clutch Stage 4 (1MD) Kit is built for peak performance in low/mild horsepower vehicles. It features a heavy-duty pressure plate, reinforced drive straps, and an Unsprung MIBA Ceramic disc (4 or 6 puck). This kit delivers quick engagement, extreme durability, and maximum control, with some clutch chatter that reduces after break-in. Ideal for dedicated race vehicles.

At Action Clutch, every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time.

NOTE: Purchasing the wrong type of clutch kit for your specific engine power output can result in premature clutch failure, damage to the transmission and void warranty eligibility. If you’re unsure what kit is right for you, contact Action Clutch direct.

170% INCREASED HOLDING CAPACITY OVER FACTORY KIT*
RACE APPLICATIONS / DRAG / ROAD / DRIFT RACING

Specifications:
Product Type Stage 4 Clutch Kit (1MD)
Product Weight (lbs) 16
SFI 1.1

What’s Included:

Single Diaphragm HD Pressure Plate
MIBA Ceramic Unsprung 6 Puck Clutch Disc
Premium Throwout Bearing
Premium Pilot Bearing
Clutch Alignment Tool

Break-in Requirements:

500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.

*Increase in holding capacity is rated in Crank Torque, not Wheel Torque
SFI Spec 1.1 Replacement Flywheels and Clutch Assemblies

Vehicle Application:

Fits for Acura CSX TYPE-S 2007-2010 (2.0L DOHC 4cyl; 6-speed; Canadian model)
Fits for Acura RSX TYPE-S 2002-2006 (2.0L DOHC 4cyl K20A2, K20Z1, 6-speed)
Fits for Honda Civic Si 2006-2011 (2.0L DOHC 4cyl K20Z3, 6-speed)

Shopping Cart

Your cart is empty.

Performance Heavy Duty Stage 4 Complete Clutch Kit Set (1MD) Compatible with Acura RSX TYPE-S 2002-2006 / Honda Civic SI 2006-2011 2.0L DOHC (K20A2 K20Z3)