Your cart is empty.
Your cart is empty.Product Description
Features:
- PlC55P is a new machine modified and upgraded on the basis of CUT50P.
- Using more high-quality IGBT transistor materials can save 30% of energy.
- Pilot arc plasma cutter dual voltage 110/220V available, dual frequency 50/60HZ, duty cycle 60% at 55 Amps.
- Max Rated Clean Cut Thickness: 1/2 Inch(12mm). Max Severance Thickness: 2/3 Inch(15mm)
- Pilot arc plasma cutter efficiently cuts through rough, painted, and rusty surfaces.
- Cutting Material: stainless steel, alloy steel, mild steel, copper and aluminum etc.
- The gas adopts harmless air to protect the environment and health.
Adopt a reasonable panel design
- The air pressure gauge is placed on the front panel of the machine. This makes it easier to observe the value of air pressure and facilitate timely adjustment of air pressure. Our recommended air pressure is 60PSI-80PSI. If the air pressure is too high, the pilot arc board will be easily damaged. If the air pressure value is too small, it is easy to damage the consumables and circuit board.
- The on/off button is also placed on the front of the machine. This helps to minimize static electricity from damaging the switch.
- LED current display, accurate display of current level.
Large-capacity Capacitor and Heat Dissipation Device
- Industrial-grade large capacitors provide more stable current regulation.
- The separately equipped heat dissipation device can greatly improve the heat dissipation efficiency.
- Improve the service life of the machine.
IGBT Module Transistor
- Adopt the latest IGBT transistor module design, it can work for a long time.
- IGBT transistor design, more intelligent control of machine work, can effectively save 30% of energy.
- The IGBT transistor design reduces the installation of large-volume parts, making the body lighter and more convenient.
All Copper Transformer and arc starter
- The all-copper amorphous transformer is used to provide a more stable output voltage for a more stable cut current.
- The all-copper ignition arc makes the cutting arc more stable.
- High temperature resistant for long working hours and durability.
Safety Protection
- Independent ventilation design system, together with the radiator, enhances the cooling capacity of the machine.
- Built-in over-heat protection, over-voltage protection, under voltage protection and over heat protection and lack of compressed air pressure protection.
- There is no 220V adapter plug.
55Amp Pilot Arc Plasma Cutter Machine
- Input Voltage: 110/220V
- Frequency: 50/60 HZ
- Rated Output Current: 15-55A
- Power Capacity: 5.8KV
- No Load Voltage: 58V
- Air Pressure: 60-80PSI
- Protection Degree: IP21
- Efficiency: 85%
- Dimension: 12.6" X 6" X 8.3" (32*15*21 CM)
- Weight: 13.5lb (6kg)
- Cutting method: Non-touch Cut.
- Clean Cutting Thickness: 12mm (1/2").
- Duty Cycle: 60% at 55Amps, 100% at 30 Amps.
José Miguel Marrero Ortiz
Reviewed in the United States on March 27, 2025
No la recomiendo tan pronto empecé a utilizarla dejó de funcionar. No sirve 😬😬😬😬😬😬
Carlos Mario Vélez Montoya
Reviewed in the United States on August 27, 2024
The product is extremely bad, the quality is not good, they do not last even 10 minutes cutting at 80 amps
WHTG
Reviewed in the United States on May 31, 2024
Great value for the money.They work as they are supposed to!
Customer
Reviewed in the United States on March 17, 2024
Works great for the average weekender great machine just didn’t get all the parts like shown had to round them up myself
Alan
Reviewed in the United States on February 3, 2024
They fit the Harbor Freight Plasma Cutter just fine.
James Konoplisky
Reviewed in the United States on January 7, 2024
I have both manual and automatic plasma cutters that utilize the P-80 style torch.This is a good quantity of the 3 necessary consumable parts at a very good price.These are a bit below the normal grade that I am accustomed to, so perhaps that is reflected in the price, but for general utility and roughing work thy should serve well.A good kit to keep up a healthy parts stock.
Chris shook
Reviewed in the United States on April 18, 2024
Unit works good, I was supposed it worked so good for the price
pipeweld60
Reviewed in the United States on April 16, 2024
my p80 torch outer tip nozzle has more thd the one i bought only has. .0.137 thd mytorch has .1735 more thd the electrode more or less the same i dont know what thes outer nozzle fite but it works this rate a 3 star my highest is a 4 i hardley give a 5 no one perfect this is for less thd my outer nozzle is1.0265 long i bought is .946 long they will work now that worth a 4 star
Recommended Products
$22.48
$ 11 .99 $11.99