Portable Hay Moisture Meter Tester with 15.7' Probe for Hay Bales,Cereal Straw,Bran,Forage Grass,Soybean Meal,Leymus Chinensis,Emperor Bamboo Grass,Alfalfa,Fibre,Hay Moisture Testing
$49.98
$49.98
$
21
.99
$21.99
- 【Measurement object】This moisture meter is widely used for measuring the moisture content of various substances, such as hay,forage grass, cereal Straw,straw bundles,bran, soybean meal,leaves,corncob,silage, fiber,wood sawdust powder,etc
- 【Wide measurement range】The moisture tester has a wide testing range of 3-40%.
- 【 Stainless steel probe】The moisture meter adopts a stainless steel probe, which is easy to insert into the measured object and durable.
- 【Backlight】The tester has a backlight display and can be used normally in dark places.
- 【Product Size】The probe length of the tester is 40cm, and the total length of the tester is 58cm.
- 【Power】Powered by 4 AAbatteries. Press firmly on the protrusion of the buckle on the side of the instrument, open the battery cover, and install the batteries.
- 【Resolution】Below 20%, with a resolution of 0.1%; 20% or higher with a resolution of 1%.
- 【“CAL+/-”button】Usually set to “0”.The tester can adjust the moisture value range from -9 to 16. (1)Set according to temperature compensation: +10℃to+35℃,set to 0; - 5℃to+10℃, set to 1; -10℃to-5℃,set to 2; - 15℃to-10℃, set to 3; -30℃to-15℃, set to 8. (2) Correct the moisture value according to personal needs.
- 【“Red button” on the handle】After the probe of the instrument is inserted into the tested object,press and hold the red button on the handle,the screen will display the measurement results(The screen display will jump from “P1” to “the measured moisture value”).
- 【Key points of operation】:To reduce errors and achieve the best measurement results,please follow the following methods: 1. The probe of the moisture tester should be vertically and quickly inserted into the tested object. 2. After inserting, press and hold the red button on the handle,the screen will display the measurement results (The screen display will jump from “P1” to “the measured moisture value”). 3.When testing the same substance multiple times, use the same technique to measure it.
