Your cart is empty.
Your cart is empty.Product Description
This high-revving motor has full-wave electronic speed control capable of producing variable speeds between 5,000 and 20,000rpm and is usable for extended periods at a time producing an exceptional power/ weight ratio. The streamlined die-cast aluminum head provides a stable housing for the ground steel spindle. It runs in a ball bearing assembly, minimizing play (max. runout 0.001"). The tool comes with six high concentricity collets sized 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.4, 3.0 and 3.2mm) along with a collet nut as well as a selection of 34 industrial quality bits and cutters with shanks Ø 3/32" (2.3mm). Technical data: Speed 5,000 - 20,000rpm. Volts 110 - 120V AC, 60Hz. Max. Power 1/8hp (100W). Length 9" (230mm). Weight 1.1 lb (500g).
Amazon.com
Featuring a variable-speed motor and a stabilizing, ball-bearing assembly, the Proxxon IB/E Professional Rotary Tool is ideal for a wide range of hobbies and professional projects. Lightweight, quiet, and capable of high torque even at low speeds, this well-balanced rotary tool includes 34 accessories that can be used for grinding, polishing, engraving, and more.
Ideal for a Wide Range of Hobby ProjectsWith an electronic speed control and 34 industrial-quality bits and cutters--including six, triple-slit steel collets covering 1/32-inch to 1/8-inch (1.0 to 3.2 millimeters)--this versatile rotary tool is the ideal addition to any workshop. It can be used for a wide range of projects that require intricate detail work like carving, etching, or engraving.
Variable-Speed Motor for Multiple Uses
The IB/E features a variable-speed motor that operates from 5,000 to 20,000 RPM and performs with high torque even at low speeds. The IB/E can be used for extended periods of time at low speeds for projects that require brushing and cutting, or at high speeds for heavy-duty jobs that require grinding and milling.
Quiet, Vibration-Free Operation
The IB/E features a quiet 1/8-horsepower motor that is specially balanced for minimal vibration, allowing you to use it comfortably and with stability, even while working on intricate details at maximum speeds. The streamlined die-cast aluminum head supports the exact positioning of the ball-bearing assembly. With a slim form and weighing just 1.3 pounds, the tool is easy and comfortable to handle.
What's in the Box
Rotary tool, 34-piece accessory set, six triple-slit steel collets, and storage case.
Frank
Reviewed in the United States on May 6, 2025
Very well made precision instrument. Very quiet. Much quieter than my old Dremel. Have not used it yet, however.
David W Alexander
Reviewed in the United States on March 20, 2025
Simply the best small rotary tool I have ever used.
Aaron TheTires
Reviewed in the United States on January 23, 2025
Update from original:The first one I ordered had an issue with axial runout being rather extreme of almost 1/2” movement at any speed. The collet couldn’t be tightened properly either. It ran good at first well enough to do some chuck jaw grinding, and spindle facing for an amazingly smooth 0.0005” TIR.I have since exchanged for a replacement and the new one seems to be extremely tight. Will update again.
Ken
Reviewed in the United States on March 15, 2024
Purchased to replace my Dremel #2 from the early '60's because the bearings have become worn and the armature overheats. This Proxxon comes with a set of collets in metric sizes but will take the eighth inch tools that were the Dremel standard. Replacement tools mostly use metric shanks anyway so this is convenient. Excellent speed control and good balance. The aluminum casting on this model houses the collet shaft in its own bearings, which is driven by the motor armature shaft through a coupling. I like this as I think it reduces vibration and improves concentricity at the tool. The tool is smaller than my old one and has a smaller motor but is powerful enough for my needs and is a pleasure to use. Applications include grinding, deburring and polishing steel, brass and aluminum; cutting and sanding of wood and plastic. I am very pleased with this tool.
ut
Reviewed in the United States on September 25, 2023
I purchased this as it was recommended by a fellow modeler on Youtube. So far, so good. I cannot give it five stars for longevity as I have only had it for over a month and have not used it enough. I have a Dremel and recently had a task that needed a rotary tool. I performed half of the task w/ the Dremel and the other half w/ the Proxxon. My beef w/ my Dremel was always about it heating up. It seems to get too hot too fast. As expected it warmed up pretty fast executing the task. The Proxxon on the other hand, did not warm up at all. I'll keep the Dremel for the rough duty tasks and theProxxon for fine work as it appears better balanced and is quieter. One nit, and this is the heads up part, to the Q/A folks at Proxxon. Brand new, right out of the box, I picked the tool up and heard something floating inside of it. I opened the rear of the case and found the object, a huge solder ball. This could have been catastrophic for the tool as it was in the same location as the printed wire board. That is something you definitely don't want loose in a device with electronics.
x
Reviewed in the United States on July 24, 2023
I've been using my current Dremel 395 for about 7 years, but lately I've been using it for several hours each day, and low torque has been a problem.I bought the Proxxon because I'd heard it had more torque AND ran more smoothly. Well, it's true. The Proxxon actually gets smoother as you increase the speed! The torque is quite a bit of an improvement - In fact, the start-up torque is quite surprising if you are accustomed to using Dremel tools.My only complaint is that the speed control dial is quite cheap looking, but that's easily remedied.Also, please note that many online reviews mention that the Dremel runs at a higher amperage, and claim that this means it is more powerful. That is just wrong. The Dremel runs at a higher amperage because it uses a carbon-brush style motor, which is much less efficient than the Proxxon motor. So, in this case, higher amperage just means more heat and noise but less torque.There are a lot of reviewers here who don't seem to understand that this type of tool, whether Dremel or Proxxon, is NOT a heavy-duty die grinder. High side-loads will definitely cause these light duty model-maker's tools to wear out. The reason the Proxxon has a metal nose-piece is to support the bearing - It's the reason that the Proxxon runs so smoothly. If you need to do a lot of cutting and grinding, buy a 1/4" die grinder.
Rutile B.
Reviewed in Mexico on July 30, 2020
Muy buena calidad de acábados y función excelente
Bobby M
Reviewed in the United States on May 27, 2020
I've burned up two Dremel 4300 pro units in the past two years. The problem with the dremels is that the guides for the brushes are plastic so if you start getting heat build up, replacement brushes don't slide in nicely (and Dremel sends the wrong brushes anyway). The Proxxon is brushless so that's a plus right there. It's also more quiet than the dremel. The only thing I'm not crazy about is that you have to change out the collets as the adjust-ability range is non-existent. I'll update with longevity if it fails prematurely.EDIT: I ended up buying an additional one a couple months later so I can quickly switch between die grinding and flap wheel finishing without wearing out the collets. One of the units, not sure which, started squealing on me which I think is the bearing wearing out. Since I don't know which unit it is, it could be the 1.5 year old one or the 1.8 year old one. Either way both are under the 2 year warranty so I'll update on how that process goes. Really I can't complain at all because these tools get at least 10 minutes of daily use, five days a week.2 Year Update: I have now purchased my fourth unit because the units I purchases approximately 19 and 23 months ago have given up. The one that had the bearing squeal was supposedly fixed under warranty and sent back to me but it's still making the noise. The one that is now 19 months old just blew out a bunch of white smoke and shorted out my power strip. I would send it back for warranty but the ID plate where the serial number was printed is worn to unreadable so I don't want to be accused of trying to warranty a unit that is out of date.The bottom line is that these are the best small rotary tools on the market, far better than dremel. You just have to know going in that if you use them a few minutes on daily basis that you'll get about 2 years out of it. I'm OK with it at this pricepoint. I've put clear packing tape over the ID plates of my newer ones so I can invoke the warranty on them.3 Year Update: I'm now down to ONE working unit out of the four I bought. Again, to reiterate, they don't owe me anything. I just wish the bearings would last longer. I don't like throwing tools away and buying new ones.
Cesar Javier Carmona cuellar
Reviewed in Mexico on October 20, 2019
Esto es de lo mejor que ha pasado por mis manos, no demerito el valor y capacidad de los dremel peor ete modelo sobre pasa por mucho todos los modelos similares de dremel, lo recomiendo ampliamente.
SleepyEng
Reviewed in Canada on March 29, 2017
I've used several rotary tools in the past, with most being cheap hardware store brands. While this one is a fair bit more expensive, it's also much higher quality than what I'm used to. Unfortunately I haven't had any exposure to the better Dremel models, so can't really compare, but I chose to buy a Proxxon when I used one and discovered how quiet and precise it was compared to the cheap tools. Even at full speed this model is much quieter than the lowest setting of the cheaper tools I've used.My use is in hobby electronics, so mainly using the alumina abrasive cutting wheels and occasionally the milling bits. So far I've found that I break far fewer of even the thinnest cutting wheels when using this tool, as the spindle is much more accurate and less wobbly. Also, this tool is even capable of reliably drilling with solid carbide PCB drills (if held with the drill-press stand, or a very, very steady hand) which is definitely not something I could say of my previous rotary tools! Overall, a dream to use compared to most cheap tools, and easier on the ears (if not the wallet) as well.
Ryb0t
Reviewed in Canada on January 2, 2016
I use rotary tools as part of my business; I'm a professional leatherworker and burnish edges of my products using a custom made cocobolo attachment. I have broken 3 dremels and one mastercraft rotary tool before finally getting the Proxxon 38481. Every Dremel I bought burnt out after about 20hrs of use.. so far the Proxxon has been amazing.The Proxxon makes sense: Dremel and Mastercraft rotary tools spin clockwise, so I would have debris fly into my face as I worked. The Proxxon spins counter-clockwise so debris flies away from you.The Proxxon is quiet: Compared to the Mastercraft and Dremel rotary tools, this thing is almost whisper quiet.The Proxxon is well built: I can get up to 20,000 RPMs on this thing and it won't shake or whine like the Dremel or Mastercraft tools. I would almost get carpal tunnel syndrome with how badly the dremel would shake at 14-15k RPM. The proxxon just whirrs and never complains.It's a mistake to think this is a hobby tool, it's much more robust and well worth the price. I often call it a 'dremel' but have to correct myself as I think it's an insult to such a great tool.
KB
Reviewed in Canada on December 3, 2013
I've only had this tool for a few days so far, so I cannot comment of longevity, but love this tool. Could have went for the Dremel, (or other brand which sell for as cheap as $30) but a previous Dremel died on me in less than a year, so I went for this. First thing, when you turn it on, you'll notice is that it doesn't have that high pitch scream sound that other rotary tools have. More of a tolerable hum. Has a dial for adjust the RMP's up to 20K. Seems to be solid and well built. The case that it comes with could be a little more form fitting for the tool, but other than that, I'm very happy with this tool so far.
Recommended Products
