Your cart is empty.
Your cart is empty.Product Description
DUAL VOLTAGE PLASMA CUTTING MACHINE - COMBINES DURABILITY AND PORTABILITY
-
Power Meets Precision
-
Upgrade your workshop TODAY
-
Durable, lightning-fast cuts for metal pros & DIYers.
-
Industrial-grade performance, home-friendly price
-
Slice through steel like butter – quieter, safer, smarter.
READY-TO-USE ACCESSORIES KITS RIGHT OUT OF THE BOX
HASSLE-FREE OPERATION WITH SIMPLE FRONT AND REAR PANELS
EFFICIENT CUTTING, GOOD FOR HOME USE
EASY TO INSTALL AND EASY TO READ AIR PRESSURE GAUGE
Aaron orf
Reviewed in the United States on May 8, 2025
I used it for a while and it felt okay，shut the machine down and put it away. I was pretty impressed with it so I decided to order one for my pops bday present. It came in on friday, and sunday I took it over and we unboxed it and got it all set up. He has never used one before so I sat up a scrap piece of iron and proceeded to show him how easy it was, only about 2 minutes mind you. Shut the machine down and went inside to cool off some. Came back out, setup a piece of angle iron that he needed notched in a few spots, fired up machine, click and nothing would happen. Looked at the unit and protection light is on. Ran over unit for 2 hours trying to figure out what had happened to no avail so I did a internet search and tons of reports of this same thing happening. Crap,
Prem
Reviewed in Canada on May 23, 2025
As a DIYer I have used pilot-arc Plasma cutters and this non-pilot-arc (HF start) is new to me - making it a new learning experience.It's still too early to comment on the pros and cons of using this Reboot 60A Plasma Cutter.The build quality appears to be good. Even the cables and earth clamp look premium. The air-filter also seems to be a good one.Voltage is auto select (as with most current models). I do have 220V in my garage, and that makes it easy to run this. My experience of running this (or other high-current machines) on 110V was not good as the breakers trip whenever the compressor kicks-in.I'm operating it using a home-use type 3.8 cfm compressor @ 90 psi. Just about 30-35 psi works well for me as I mostly cut less than 1/4" steel.There's nothing much to dial-in. It's a simple machine with just the current adjust knob, and it works on 2T.
J
Reviewed in Canada on May 22, 2025
Ce découpeur plasma compact offre des performances impressionnantes et un excellent rapport qualité-prix pour sa taille. Il prend en charge les entrées 120 V et 240 V, avec des résultats nettement meilleurs en 240 V — particulièrement pour la découpe de matériaux plus épais comme l’acier de 3/8" à 1/2". Bien qu’il puisse fonctionner en 120 V, cette configuration est mieux adaptée aux tôles fines et aux tubes à paroi mince.Il est doté d’un allumage à haute fréquence (HF), permettant une mise à feu sans contact. Bien qu’il ne dispose pas d’un arc pilote, l’allumage HF est efficace sur des surfaces propres et constitue une amélioration par rapport aux anciens modèles à amorçage par frottement. La torche de style PT-30, bien que moins moderne, est fiable et compatible avec des consommables largement disponibles et abordables. Plusieurs consommables sont inclus pour commencer immédiatement.L’installation est rapide et simple, nécessitant uniquement une connexion à un compresseur d’air. Léger et compact, ce découpeur est idéal pour un rangement en atelier ou une utilisation mobile. Les câbles de torche et de masse sont suffisamment longs pour limiter les déplacements de l’unité pendant l’utilisation.Ce découpeur plasma convient parfaitement aux travaux de tôlerie, à la réparation de carrosserie automobile, à la petite fabrication et aux projets de bricolage. Il excelle en précision et en contrôle pour les travaux de petite à moyenne envergure, bien qu’il ne soit pas conçu pour un usage industriel intensif ou la découpe d’aluminium épais.Verdict finalFiable et facile à utiliser, ce découpeur plasma offre une excellente valeur pour les besoins de métallurgie légère à modérée. Sa portabilité, sa simplicité d’utilisation et son prix abordable en font un excellent choix pour tout atelier domestique ou de bricolage.Pas parfait, mais pour le prix, je donne 5 étoiles
Scott M
Reviewed in Canada on May 19, 2025
First off I want to state that I am by no means an expert on plasma cutting and have never used a plasma cutter before. I do art pieces out of metal and I have been using manual tools to cut the metal. I saw this reasonably priced plasma cutter and thought it would be a great way for me to make cutting metal easier.The plasma cutter arrive nicely packaged. I was surprised by the compact size which makes this very portable and easy to store.The cutter comes with everything you need except an air compressor, which you must provide.There is the option to use 240 or 120 Volts and I decided to use 240 volts since that provides the best cutting power.The consumables required for this plasma cutter are readily available on Amazon and inexpensive.I tried this on several different materials, including sheet metal and copper, and it cuts perfectly and very easily.This is a super easy machine to use even for a novice like myself and it definitely saves a lot of time in cutting metal.I do recommend this.
Alberto F.
Reviewed in the United States on May 18, 2025
broke the 2nd hour of use
Tim
Reviewed in the United States on March 5, 2025
Picked this up for handyman work around the house. Cutting sheetmetal, small tube, autobody, and light fab work. Works great on 240v and will cut 3/8" to 1/2" mild steel if you take your time. 120v will limit you to light sheet metal, autobody, and thin wall tube, and you have to be willing to move slowly and take your time.It is non-touch with HF start even though it's not mentioned in the description. But I think most new units are HF start instead of the old technology of scratch start.Unit is light and small which makes it great for garage work. You can keep it put away until you need it and setup is quick and easy. Consumables are easy to find and economical to purchase. For the money this is a great little unit to keep around the house for random metal work. Works great for light fab work and doesn't take up a bunch of space. Price point is perfect for what you're getting.
Rick W
Reviewed in the United States on March 28, 2025
This is a nice little cutter at a price point that almost anyone can justify if you do any metal work. Easy setup and you don't have to bring anything else except a hose from your air compressor. The electrodes and extended tips are easy to find on Amazon and are inexpensive and it comes with half a dozen of each to get you started. I ran the thing on 208v and it didn't complain.Has a high frequency start rather than pilot arc. I'd rather have pilot arc as I think it's easier to start on suboptimal surfaces like rust or paint, but I think that's a feature of more expensive units. Unless you're cutting primarily sheet metal, I don't recommend running the unit on 120v, but it'll work. I'm planning to use this for a local live theater - they build sets with a lot of metal components and then they tear them down again - I think this small unit will make all that easier.
Pamela J Seeley
Reviewed in the United States on March 13, 2025
Absolutely incredible tool for any metal working projects, easy to setup and use right out of the box, works amazingly well, gives you a nice clean straight cut through the material with ease, small and portable size for easy transport, overall great product that works very well for a great price.
James Konoplisky
Reviewed in the United States on March 1, 2025
This is an old soldier in a fresh new uniform. The PT-30 style torch is not the most advanced but it has been around quite a while, I believe it was originally a ESAB torch design.Consumables are plentiful and cheap.The machine is a high frequency start, that really does not require actual touching of the work piece, a HF spark jumps to the work much like a TIG torch. Scratch start plasmas are very old tech, I do not think any are even made these days.These machines are good basic cutters for clean cuts in 1/2' steel
J. Fisher
Reviewed in the United States on April 13, 2025
For the size this is a really good plasma cutter. It can work on 120 or 240 volts and has a good duty cycle. It does not work well on aluminum though. The torch lead and ground lead are really long so you do not have to reposition the unit over and over again.
Richard Madison
Reviewed in the United States on April 1, 2025
For a small home job, it's great. Not for thick plate. As a tinkerer and someone that likes to doit myself instead of paying someone else to do things this is great. Was able to cut some of the bad spots out of my trucks body and not have the jagged lines so the replacement panels fit nice. There is a bit of a learning curve but that's half the fun I think.
Recommended Products