Your cart is empty.
Your cart is empty.Product Description
Install Bead Stop to make your roller shade stop exactly where you want!
Each of your clutch comes with a Clear Bead Stopper. This tiny piece serves a few important purposes.
- Make your shade stop exactly where you want (most of the time when the bottom rail touches the window sill).
- Since the shade stops when it touches window sill, the shade hangs straight without wrinkles nor puckering.
- For most roller shades, the fabric is glued to the head roller. So if the shade keeps rolling, the extra fabric (that attached to the roller) is exposed and eventually may deglue and fall off to the ground!
To attach the Bead Stopper: lower the shade all the way down (to your desired stop point), insert the clear bead stopper on the back of the bead loop adjacent to the clutch.
Roller Clutch R24, R16, R8
Rollease. The most dedendable Roller Shade Clutches on the market
Lifting Capacity:
- R8, 1" tube, lift 9lbs
- R8, 1 1/8" tube, lift 8lbs
- R8, 1 1/4" tube, lift 7.2lbs
- R8, 1 1/2" tube, lift 6lbs
- R16, 1 1/2" tube, lift 16lbs
- R24, 1 1/2" tube, lift 24lbs
You can add adapter to R16 and R24 clutch to fit bigger tube size. There are 2 adapters: 2" and 2.5"
The internal spring arrangement distributes the forces evenly over the inner core for a smooth and durable pull. The clever ratio between bead chain pulley and shade tube allow the pull forces to raise a shade to be less than the actual weight of the shade.
Recommended Products