Your cart is empty.
Your cart is empty.
Specifications:
General Description
Weight: 1170g
Dimension: 480mmx110mmx65mm
AC/DC Adaptor
Model: QSC-706A
Input:100-240V~50/60Hz 0.8A
Output: 13.2V-3.0A
Universal Rapid Charger
Model: QSC-706S-D(1/2/3/4)
Input: 15V-3A
Output(Li-lon 2xCells): 8.7V-500mA
Output(Ni-MH 6xCells): 9.4V-500mA
Output(Li-lon 1xCells): 4.2V-500mA
Compatible with:
Motorola CP040, CP140, CP150, CP160, CP180, CP200,CP200D,CP200XLS,CP340, CP360, CP380, EP450, GP3138, GP3688, PR400, etc. radio batteries.
This unit allows you to charge NiCD, NiMH and Li-Ion batteries.
When charging the LED light is RED, when it is charged full LED light will change to GREEN.
Package Include:
1 x Six-way Charger
1 x PSU with Power cord
jesus
Reviewed in the United States on October 1, 2024
Exelente
StephensFam
Reviewed in the United States on August 8, 2023
Works well but definitely did not charge quickly.
Denver N. Geitgey
Reviewed in the United States on December 11, 2023
These do not work on a CP 200 radio. The radios certainly would not stand in the holder tight enough to be transported down the road. And the box looked like some one just ripped it open just to see what was inside... No Thanks.
Maggie Goll
Reviewed in the United States on February 6, 2021
Six way Motorola charger:So after reading other reviews saying it wouldn’t charge certain batteries, I decided to try it out anyway.As others have said, there are not trays in the wells to flip around, as there are on the oem chargers. For me, this means that I can’t charge the batteries without being attached to a radio. Not a problem for my application, but could be a deal breaker for some. I have a feeling that it wouldn’t be too hard to make a little spacer to hold the batterie against the contacts, but we will see how that goes at a later date. XMy CP-200’s fit just fine (there is a bit of a wiggle to get them to seat right, and to see the lights turn from green to red). I’m using OEM Motorola 2250mAH lithium batteries.If you’re testing one out for the first time, make sure your batteries are NOT fully charged, as there’s no good way to see the radio is connected when they have a full charge (the light is green when bat is at 100%, or disconnected. It only turns red while charging.)(edit: I found that if you turn on a fully charged radio while it’s on the charger, the power on beeps draw enough power that the led blinks to yellow/red, indicating that the radio is connected to the charger.)Over all, for a $200 savings, I’m willing to wiggle the radios on the way into the charger. I’ll update if anything changes, but I’m going to be buying another unit soon.
DON VINKEMULDER
Reviewed in the United States on November 5, 2021
Needed this to mount radios in an angled 50* position in work trucks. Radios fit very loose and fall out. CP200 radios. Item is useless for my needs.
Julia Cole
Reviewed in the United States on February 27, 2020
Works perfect and charges my Motorola Radios fast.
winchmonkey
Reviewed in the United States on August 5, 2019
This charger works well with the slim batteries, but can only charge the thicker batteries if a radio is attached, and doesn't make great contact.
J
Reviewed in the United States on May 27, 2019
Insert in bottom does not flip or come out to charge extended batteries like the oem Motorola chargers . I had to buy all new slim batteries to use this charger. It is also very slow to charge radios. You get what you pay for.
Recommended Products
