Shopping Cart

Your cart is empty.

Your cart is empty.

Stage 4 Clutch Kit (1MD) Compatible with Nissan 370Z 2009-2020 3.7L (VQ37VHR) Without Heavy Duty Concentric Slave Cylinder

5.0 Write Review
Free shipping on orders over $29.99

$451.96

$ 99 .00 $99.00

In Stock
  • ππ‘π„πŒπˆπ”πŒ 𝐂𝐋𝐔𝐓𝐂𝐇 π˜πŽπ” 𝐂𝐀𝐍 𝐅𝐄𝐄𝐋 𝐀𝐍𝐃 𝐓𝐑𝐔𝐒𝐓: A new definition of an affordable performance clutch is being introduced by Action Clutch. It is really the highest quality and value available. Clearly. To guarantee the best quality and satisfaction, Action Clutch designs, engineers, assembles, tests, and inspects every product in the United States.
  • π‡πŽπ‘π’π„ππŽπ–π„π‘ π‘π€π“πˆππ† 𝐀𝐍𝐃 π“πŽπ‘ππ”π„ π‚π€ππ€π‚πˆπ“π˜: 569 HP/ 498 lb-ft, Suitable for off-road use, track use, performance street driving and minimal daily use.
  • πŠπˆπ“ πˆππ‚π‹π”πƒπ„π’: Performance HD Pressure Plate, Performance Stage 4 Ceramic 6-Puck Rigid Disc (9-7/8" x 1" x 24 spline), Single Diaphragm HD Pressure Plate, MIBA Ceramic Unsprung 6 Puck Clutch Disc, Premium Throwout Bearing, Premium Pilot Bearing, Clutch Alignment Tool
  • π‹πˆπŒπˆπ“π„πƒ π–π€π‘π‘π€ππ“π˜: All Action Clutch products comes with excellent customer support and limited manufacturer warranty of 12 months or 15,000 miles that covers issues related to performance, fitment and function. Buy with confidence!
  • 𝐓𝐇𝐄 π…πŽπ‹π‹πŽπ–πˆππ† ππ‘πŽπƒπ”π‚π“ πˆπ’ π€πππ‹πˆπ‚π€ππ‹π„ π–πˆπ“π‡: Fits Nissan 370Z 2009-2020 (3.7L DOHC 6cyl VQ37VHR), Fits Infiniti G35 2007-2008 (3.5L DOHC 6cyl VQ35HR), Fits Infiniti G37 2008-2013 (3.7L DOHC 6cyl VQ37VHR), Fits Infiniti Q60 2014-2015 (3.7L DOHC 6cyl vQ37VHR), Fits Nissan 350Z 2007-2008 (3.5L DOHC 6cyl VQ35HR)


Action Clutch Stage 4 (1MD) Kit is built for peak performance in low/mild horsepower vehicles. It features a heavy-duty pressure plate, reinforced drive straps, and an Unsprung MIBA Ceramic disc (4 or 6 puck). This kit delivers quick engagement, extreme durability, and maximum control, with some clutch chatter that reduces after break-in. Ideal for dedicated race vehicles.

At Action Clutch, every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time.

NOTE: Purchasing the wrong type of clutch kit for your specific engine power output can result in premature clutch failure, damage to the transmission and void warranty eligibility. If you’re unsure what kit is right for you, contact Action Clutch direct.

170% INCREASED HOLDING CAPACITY OVER FACTORY KIT*
RACE APPLICATIONS / DRAG / ROAD / DRIFT RACING

Specifications:
Product Type Stage 4 Clutch Kit (1MD)
SFI 1.1

What’s Included:

  • Single Diaphragm HD Pressure Plate
  • MIBA Ceramic Unsprung 6 Puck Clutch Disc
  • Premium Pilot Bearing
  • Clutch Alignment Tool

Break-in Requirements:

500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.

*Increase in holding capacity is rated in Crank Torque, not Wheel Torque
SFI Spec 1.1 Replacement Flywheels and Clutch Assemblies

Vehicle Application:

  • Fits for Nissan 370Z 2009-2020 (3.7L DOHC 6cyl VQ37VHR)
  • Fits for Infiniti G35 2007-2008 (3.5L DOHC 6cyl VQ35HR)
  • Fits for Infiniti G37 2008-2013 (3.7L DOHC 6cyl VQ37VHR)
  • Fits for Infiniti Q60 2014-2015 (3.7L DOHC 6cyl vQ37VHR)
  • Fits for Nissan 350Z 2007-2008 (3.5L DOHC 6cyl VQ35HR)