Technical Super Market Professional Wax Burnout 1100 C (2012 F) Top-Loaded Programmable Kiln with Flask and Air Extractor, galvanized steel

This is professional, 10 l chamber, top-loaded electrical muffle kiln with a 32-segment temperature/time controller, 4″ diameter flask and with air extractor was especially designed for work with wax burnout process, but can be used also for any other purpose when required top temperature is below 1100 c. This 32-segments (temperature-time) controller with internal over/low-temperature regulation system (for holding same temperature during the whole soaking process) and a smoothing circuit digital guard for accurate reading and stability work on fluctuations of electricity that is very important option for most materials such as glass, ceramic and porcelain. ***Before placing the order, please make sure that the inner dimensions of the kiln's chamber match your requirements. If you have any questions regarding the technical specification of the kiln, you can always contact us and our technical expert will happily provide free technical advice to help you. Detailed Technical specifications: – Power – 2200 Watt; – Volume of chamber: 10 L. – Maximum working temperature – 1100 C (2012 F); – Kiln dimensions with electrical box in MM (inch): 530 (21″) wide x 400 (16″) x 350 (14″) height; – Dimensions of flask: 100 mm (4″) diameter x 150 mm (4″) height; – Air Extractor flow – 1 sq.m/min; – Hexagon ceramic wax-tray for 4″ flask; – Estimated heating time to 1100 C – 150 minutes; – Chamber’s dimensions in MM (inch): 250 (10″) diameter x 200 (8″) height – please see an image; – 32 time/temperature segments on 2-line programmable temperature controller that will allows you AUTOMATICALLY reach, hold (soak) and change up to 32 temperature/time points; – Two heating elements around all walls; – Digital over/low-temperature regulation secure system; – Smoothing circuit (controller’s stability work) digital guard; – Movable lid with two handles as supports; – Industrial graded K-thermocouple; – Calibrated on five points. Estimated accuracy of SOAKING temperature: +/- 1 C; – You will require a standard screw-driver to fix electrical box with temperature controller and a thermocouple to this kiln by few screws (supplied). – Weight – 29 Kg (39 kg in wooden box with flask and Air Extractor); – Cable – 2.5 M; "Please bear in mind that although the postal charge is included in the price you still may be obligated to pay the custom charge in your country (Not applicable to UK & US)"