Shopping Cart

Your cart is empty.

Your cart is empty.

UL&CE Digital Temperature Controller -40℉-176℉ Refrigeration Heating Cooling Incubator Thermostat with 2 Relays Output 4 NTC or PT1000 Probe Inputs

Free shipping on orders over $29.99

$59.99

$ 28 .99 $28.99

In Stock

About this item

  • Certificate:UL&cUL,CE&Rohs
  • Measuring and regulation range: NTC probe: -40°C to+80°C (-40°C to 176°F) PT1000 probe: -40°C to +80°C (- 40°F to +176°F)
  • Inputs: Up to 4 NTC or PT1000 probes
  • Power supply: 110-240Vac ± 10%, 50/60Hz
  • Power absorption: 5VA max
  • Digital inputs: 2 free voltage
  • Relay outputs: Total current on loads MAX. 20A
  • Mounting: Panel mounting in a 71x29 mm panel cut-out
  • AUX: relay SPST 12(5) A, 250Vac
  • Compressor: relay SPST 16(8)A, 250Vac
  • Other output : Buzzer (optional)
  • Hot key: USB
  • Serial output : RS485;
  • Communication protocol: Modbus - RTU
  • Data storing: On the non-volatile memory (EEPROM)
  • Internal clock back-up: 24 hours (only for model with RTC)
  • Kind of action: 1B
  • Pollution grade: 2
  • Software class: A
  • Rated impulsive voltage: 2500V
  • Over voltage Category: II
  • Operating temperature: 0 to +60 °C
  • Storage temperature: -30°C to +85°C
  • Relative humidity: 20% to 85% (no condensing)
  • Housing: Self extinguishing PC
  • Resolution: 0.1 °C or 1°C or 2 °F (selectable); Accuracy (ambient temp. 25°C): ±0.7 °C ±1 digit
  • Case: Facia 32x74 mm; depth 82mm
  • Protection: IP20; Frontal protection: IP65
  • Connections: Screw terminal block≤2.5mm² heat-resistant wiring


Model FTC008-A3D(RTC), format 32 x 74 x 82 mm, is a digital thermostat with off cycle defrost designed for refrigeration applications at normal temperature. It provides two relay outputs, one forthe compressor, the other one can be used as auxiliary output. It could be provided with a Real Time Clock which allows programming of up to 6 daily defrost cycles, divided into holidays and workdays. A “Day and Night” function with two different set points is fitted for energy saving. It is also provided with up to four NTC or PT1000 probe inputs, the first one for temperature control, the second one, to be located onto the evaporator, to control the defrost termination temperature. The third and fourth probes are used to signal the condenser temperature alarm or to display a temperature. There are two digital inputs (free contact) for the door switch and configurable by parameter. Two RS485 outputs allows the user to connect a ModBUS-RTU compatible monitoring system and use for remote display. The USB port allows the user to connect the “Hot Key” to programme the parameter list. The instrument is fully configurable through special parameters that can be easily programmed through the keyboard.


Recommended Products

$529.99

$ 99 .00 $99.00

4.7
Select Option

$25.20

$ 10 .99 $10.99

4.4
Select Option