Your cart is empty.
Your cart is empty.
Bovimix Cow Block Adhesive
A two component, room temperature curing, natural colored, oderless, thixotropic polyurethane adhesive specifically desighned for structural bonding of a wide range of materials, as well as thermosetting and thermoplastics materials, steel, aluminium, concrete, wood and glass.Processing: The strength and durability of bonded joints depend on proper pre-treatment of the surfaces to be bonded. At the very least, joint surfaces should be cleaned with a good degreasing agent in order to remove all traces of dust, dirt, oil and grease. Pre-treatment of thermoplastics materials such as PVC, polycarbonate, polypropylene, PMMA, etc., can be made using a mixture of light ethers or with isopropanol. Use of strong solvents is not recommended due to the risk of damage to the plastic surface. Pre-treatment of other surfaces can be made using acetone or trichloroethylene. Petrol or other solvents should never be used.
Where possible, carry out a mechanically abrasion to remove paint from the surfaces (where necessary) and to increase strength and resistance of the adhesion. Let dry the pre-treated area before applying the adhesive.
$65.99
$ 26 .99 $26.99