Shopping Cart

Your cart is empty.

Your cart is empty.

Ultrasonic Flaw Detector TFD806C Range 0-10000 mm at Steel Velocity DAC, AVG, TCG AWS, etc.

Free shipping on orders over $29.99

$1,499.00

$ 99 .00 $99.00

In Stock

About this item

  • User friendly dialog interactive helps operations like Calibration, making curves, etc
  • All tools you need: DAC, AVG, TCG AWS, etc.
  • Pulse Repeatition Frequency: 10-2000Hz precise adjust, high speed scan, no miss out.
  • High Signal to noise ratio, clear and stable echo, anti-noise design, perfect for tough working conditions.
  • 12-digit AD, high speed sampling leads to better echo diagram with all details. Sensitive and can detect even tiny flaws.
  • Can use probe frequency 20M perfectly
  • IP65 standard. Protective rubber casing. Damping support makes it stands in any angle
  • Battery lasts 15 hours for one charge



Product Description

TFD806C

Features

  • User friendly dialog interactive helps operations like Calibration, making curves, etc.
  • All tools you need: DAC, AVG, TCG AWS, etc.
  • Pulse Repeatition Frequency: 10-2000Hz precise adjust, high speed scan, no miss out.
  • High Signal to noise ratio, clear and stable echo, anti-noise design, perfect for tough working conditions.
  • 12-digit AD, high speed sampling leads to better echo diagram with all details. Sensitive and can detect even tiny flaws.
  • Can use probe frequency 20M perfectly .
  • IP65 standard. Protective rubber casing. Damping support makes it stands in any angle.
  • Battery lasts 15 hours for one charge.

3201

Main Interface

Report

Report

3203

Menu

3204

Making DAC

coded echo

Coded Echo

Standards

Standards

AVG set

AVG SET

2510

Report List

Specification

Range 0-10000 mm ,at steel velocity
Material Velocity 100~20000 m/s
Pulse Repetition Frequency 10-2000Hz
Dynamic range ≥38dB
Linearity: Horizontal +/-0.2%, Vertical: 2.0%(Horizontal:+/-0.2% FSW Vertical: 0.25% FSH )
Resolving Power >40dB (5P14)
Sensitivity Leavings >68dB
Reject (suppression) 0 to 80% full screen height
500 independence setup any criterion can be input freely, we can work in the scene without test block
Big memory 1000 A graph
Test Modes Pulse echo, dual element and thru-transmission
Probe Types Single Straight, Single Angle,Dual Straight, Dual Angle, Through, Creeping,Surface
Gate Monitors Two independent gates controllable over entire sweep range
Units Inch or millimeter
Power Requirements AC Mains 100-240 VAC, 50-60 Hz
Display Delay -20 to 3400 µs

Specification

Probe Delay/Zero Offset 0 to 99.99µs
Battery Internal rechargeable Li-ion battery pack rated 7.2V at 8000 mAh./15 hours nominal operating time depending on display brightness./4 hours typical recharge time
H×W×D(mm) 250×165×55 (mm)
Weight 1.2kg
Operating Temperature -10℃ to 50℃./Storage Temperature: -30℃ to 50℃
Pulse Energy 70V,100V,200V, 300V, 400V, 500V selectable
Rectification Positive half wave, negative half wave, full wave
Bandwidth (amplifier bandpass 0.2 to 25 MHz
Gate Monitors Two independent gates controllable over entire sweep range
Sensitivity 120 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB.
Transducer Connections BNC or LEMO

Functions

  • Automated display precise flaw location(Depth d、level p、distance s、amplitude、sz dB、ф).
  • Flaw sizing: Automatic flaw sizing using AVG or DAC/TCG, speeds reporting of defect acceptance or rejection.
  • Automated calibration of transducer Zero-point, Angles, Front edge and material Velocity . ( V2 and two hole )
  • Convenient to make and use DAC/TCG and AVG to evaluate the echo, the curve can be modified and compensated.
  • Connecting U-Disk,the unit can get unlimited memory.
  • There are 15 standards of in the unit.
  • Blue tooth connection to mobile device to generate and print detection reports on-site.(Option)
  • AWS D1.1.
  • Curved Surface Correction feature.
  • Crack Height Measure function.
  • Magnify gate:spreading of the gate range over the entire screen width.
  • Auto-gain function.
  • Envelope: Simultaneous display of live A-scan at 70 Hz update rate and envelope of A-scan display.
  • Peak Hold: Compare frozen peak waveforms to live A-Scans to easily interpret test results.
  • Scan Freeze:Display freeze holds waveform and sound path data.
  • Alarm:Beep and LED.
  • Real Time Clock.
  • Fill echo.
  • Capture mark.
  • Echo color within the Gate

Base Instrument Package

Portable Ultrasonic Flaw Detector

Straight Beam Transducer (2.5 MHz, Φ20)

Angle Beam Transducer (4 MHz, 8 mm×9 mm, 60°)

Interconnect Cable for the transducer (Q9-C5,or optional C9- C5)

Rechargeable Li-Ion Battery Package, 8 amp hour

Power supply/charger unit

Operating Manual in English

App Software

protective rubber casing

Strap

Options:

1.Swiveling metal support, Damping support makes it stands in any angle.

2.V2 block.

3.leather sheath.

(If you need the optional parts, please leave message)


Recommended Products