Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell Spiral Point Taps, M6 x 1 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

5.0 Write Review
Free shipping on orders over $29.99

$11.29

$ 5 .99 $5.99

In Stock

1.Size:M6 X 1


  • Spiral Flute Taps: Thread Size: M6 x 1 + 0.1; Square End Size: 5mm / 0.2". Spiral point design, downward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
  • Wide Applications: Suitable for processing through-hole threads. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance.
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping tools, such as tap wrench, tapping machine. Micro taps(such as M1-M3.5) are mainly used in clocks and watches, tapping wood and soft metals with lower hardness.


Product Description

1

Information

Taps has straight flute thread taps, spiral flute thread taps, spiral point thread taps and thread forming taps. They are also classified into hand taps and machine taps according to the usage. Be sure to select the appropriate cutting oil for complex tapping process and apply anti-rust oil for maintenance after use.

Spiral point tap is a deformation of the straight flute tap. The cutting edge of the straight flute is slanted to form an angle, and the chips are discharged forward along the direction of feed. The through-hole threads should be preferentially drilling by spiral point taps.

1

Spiral Point Taps

Spiral point design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy. It has high hardness and toughness, wear resistance and heat resistance.

Special Design

Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used.

Titanium Coating

Provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction.

  • Used on drilling and tapping machines, CNC and milling machines.
  • Use with tapping oil to get higher quality threads and more durable taps.
  • Cutting oil is lubrication, cooling and anti-sticking.
1

Wide Applications

Suitable for processing through-hole threads and deep-hole threads. For drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..

Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break

Tips

Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is easy to cause breakage to the tap, so it is not recommended.

Taps are prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping tools, such as tapping wrench, tapping machine. Micro taps (such as M1-M3.5) are mainly used in clocks and watches, tapping wood and soft metals with lower hardness.