Your cart is empty.
Your cart is empty. Compatible:
905-212 bonnet repair kit for febco 765 EVB 1" and FVB 1-1/4" vauum pressure breaker valve, vacuum breaker and backflow preventer.
Easy to use:
No special tools required for servicing for febco bonnet & poppet kit, hand tightening is all that is needed to install this for Febco 765 1 Repair Kit 905-212 replacement into the system, tighten with the proper tool,when necessary,and apply the supplied grease to the bonnet parts and the threads of the bronze valve.
Installation Instructions:
First close the outlet shutoff valve, then close the inlet shutoff valve, drain the residual water completely. Then unscrew the top nut and release the brass canopy. Take out the old Bonnet & Poppet parts and dispose. Then put the new poppet inside the chamber. Unscrew the nuts from the bonnet copper column, then hand tighten the bonnet part clockwise into the vacuum breaker (Apply grease on threading if needed.) Place the canopy onto the secured bonnet part by put bonnet column through the canopy hole. Tighten the top nuts back to secure the canopy.
Finally Open the inlet ball valve to pressurize the device, temporary splash is normal, the "splash"will auto shutoff once the device is fully pressurized. Then slowly open the outlet ball valve to fill the downstream line.
Package including:
1x 765-1 repair kit includes bonnet, O-ring, spring, E-ring, washer, stem, rubber disc, poppet.
Note:
This item is an economical affordable aftermarket replacement part. Not manufactured by the original brand, but also 100% functional.
$260.00
$ 99 .00 $99.00