Your cart is empty.
Your cart is empty. Description:
Material:fiberglass
Thermal Conductivity:1.5 W/m-k
Long term heat resistant 120°C
short term heat resistant 180°C
Breakdown Voltage: 4KV
Adhesive power:6.5 N/cm
Width:10mm/0.39inch
Thickness:0.2mm
Length:25m/82ft
APPLICATION:Widely used for LED, power supply module, Computer CPU, GPU, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip, DDR Memory Modules, SSD drives.
Package Included:
1 x Double Side Adhesive Thermal Conductive Tape 10mm x 25m
1 x 1.5m Measuring Tape
Customer
Reviewed in the United States on July 9, 2023
Efficient, great quality gets job done right the frist time
Dean M
Reviewed in Canada on January 6, 2023
The tape adhesion is ok but the heat transfer ability is suspect at best. I would not recommend using this product to attach a heatsink to any device that generates a lot of heat, especially that rose in temperature very quickly. I would not beMy own experience was with a hot running controller chip. I wanted to switch to a bigger heatsink that had an attached cooling fan, and I used this tape to fasten it. Mistake. When I powered up the chip, the heatsink stayed fairly cool. Sure enough, the board on which the chip was soldered became super hot to the touch. Previously the old heatsink heated up very quickly - a sure indication the heat transfer to the new heatsink was no longer working well.I would be particularly concerned if it were used on any chip that heats up very quickly as it may get damaged or may shut itself down before any heat transfer even occurs. CPU? GPU? Definitely not.
Recommended Products
