Your cart is empty.
Your cart is empty. EAB Tool 2100007 13" Laminate Floor Cutter with Installation Kit
For quick, quiet and clean installations of laminate and engineered wood flooring. Maximum cutting width: 13" (330mm). maximum cutting depth: 5/8 inch (16mm).
Heavy duty, aluminum and steel framework, with solid ABS work surface. Handle can be extended for additional leverage and easy cutting. Replaceable blade can be re-sharpened with included sharpening Stone.
EAB Tool 2100009 13" Industrial Laminate Floor Cutting Replacement Blade - Recyclable,
Replacement blade for 13" laminate floor Cutter precision cuts with No splintering or chipping go Green and recycle this product
M. Rygh
Reviewed in the United States on January 15, 2024
This cutter was just the tool I needed to install Pergo (laminate) in my house. Just finished doing 1400 sq. ft. and very pleased with the tool's performance. Really speeded up the project with not having to run out to the table saw for every cut. Other reviews complained of the guide bar. I just fastened it down to the deck with one drywall screw and it worked fine. Note the tool makes decent cuts and be aware that the lever needs a good tug. The cut edges are good enough for along walls where the baseboard trim will cover (see pic). I still go to my table saw for ripping lengthwise and other fine cuts. Tool comes with cute little sharpening stone that works well. Just work the blade once a day with the fine side of the stone and the cutter stays sharp enough. Did not try this tool on LVF but my guess is that is would do well with the softer material.
J. Martin
Reviewed in the United States on June 27, 2023
It took two tries to get a serviceable unit. First unit was an Amazon return that should never have been re-sold, as it had manufacturing defects that rendered it unusable. Questionable QC at EAB and Amazon warehouse. (Actually, first purchaser should have notified Amazon of the problem, and not simply returned the unit. Warehouse would have no way of knowing without trying to assemble and use the unit.)Second unit (new) went together well and worked properly. Not really as easy to use as I had hoped, but it did the job. Took some strength to cut 3/8" engineered bamboo. A little awkward to hold down board while pushing down handle, but it works. Most cuts nice and clean. Push the handle down like you mean it.As other reviewers have said, angle guide is useless. I permanently fastened it for 90 degree cuts.If you need to not make noise or a mess, or it is too time consuming and inconvenient to walk outside to your chop box, this unit will make you happy.
Rebecca
Reviewed in the United States on April 18, 2023
Quality control at the company is not very good. I had to redrill holes to line things up so it could be assembled. The fence/angle part refused to stay tight so I screwed it in place at 90 degrees. But aside from assembly, it works well and I have used it to install over 800 sf of flooring with out any issues.
Steve
Reviewed in the United States on August 4, 2022
My current project has me installing the entire 2nd story of my house with 12mm engineered wood flooring so I purchase the 13" cutter. I have installed floors elsewhere in the house and always hated going outside to the chop saw to cut boards. I can now have this tool in the room where I am working, saving time, and avoiding stairs, saw noise, the resulting dust, and quickly wearing out expense 12" blades. I do find that despite the cutting guide, I have to pay more attention to getting a true 90-degree cut, as well as the correct cut line for those cuts where length is really important. This tool is truly a lifesaver.
STABERDEARTH
Reviewed in the United States on September 6, 2021
There is not much to say about this laminate floor cutter. It is a brute, cuts cleanly (keep the blade sharp!) and accurately. It has a very smooth, gliding, and positive feel to it. This cutter has reduced my floor install time by at least 20-25% since there is little up/down off the floor to make cuts and essentially no cleanup.The only thing that would push this unit over the top with me is putting a storage system underneath the hollow. With a slight redesign of the tapping block, all accessories, including the hex wrenches, could be stored with the cutter keeping everything in its place and so you don’t have to hunt for all of it since you’re going to use most of it anyway in an installation. I’m in the process of designing my own. Take note manufacturer. This would be an attractive added bonus.
AGH
Reviewed in the United States on October 13, 2019
Unit broke on first cut. Literature and Mfg's website says it will cut bamboo flooring. It does not.Is probably a great tool for thin laminates and vinyl but do not use for engineered T&G bamboo flooring.Will be returning if possible.
Lari Marco
Reviewed in the United States on September 29, 2018
I had very high hopes and was excited to receive the cutter on time.PROS:- relatively easy to assemble- cleanly cuts most laminates you can find at the big box stores. I tried a variety of 12mm laminate samples (Pergo, Allen + Roth, TrafficMaster, etc.)CONS:- the locking mechanism is not well aligned, though only a minor issue for me because it still locks- if you are considering to use this to cut the Floor and Decor AquaGuard Water-Resistant Laminate, similar to mine SKU: 100489814, then this won't be able to cut cleanly. I find that the laminate core is too tough for the blade to handle.Since I have tested this with any other laminates and found it to cut those cleanly, I am still giving it the high rating and will recommend it to anybody to give it a try. Customer Service is also excellent, and quick to respond.I'm forced to use the SKIL Flooring Saw, even though I'd rather not use any saw for cutting if I can avoid because I'm allergic to dust. I'll have a separate review on the SKIL 3601-02.
William R. Barton
Reviewed in the United States on October 19, 2018
The first delivery on this item arrived with some problems, mainly that the tension springs on the cutter head were not compressed, so the blade was loose in its track. After examining the adjuster mechanism in the feet I decided I probably shouldn't try to fix it myself so I sent it back. The replacement arrived within 2 days! This one was pristine and included some bonus items in the package (a puller tool, a tapping block, and some edge spacers). The assembly instructions for this are sketchy, but I'm an experienced mechanic engineering tech, so I put it together based on the picture on the outside of the box. It works great, and will save me a lot of trouble re-flooring my house with laminate and vinyl tile. Be careful! There's a lot of ways to assemble this wrong, and a number of ways to hurt yourself with it. The blade is sharp (as you'd expect) and I found an aluminum burr on the frame with my fingertip. Worth the price!
Recommended Products
