Your cart is empty.
Your cart is empty."
The LuMuank 15Pcs Chuck Collet Set offers a robust upgrade for rotary tool users, emphasizing durability, precision, and versatility.
Durable Construction:
Alloy Keyless Chuck: One-piece design with a built-in spring ensures secure bit clamping, even at high speeds, avoiding frequent tool changes.
Brass Collets: High-quality brass provides superior wear resistance and anti-bend properties compared to aluminum. The 4-claw grip minimizes vibration, enhancing precision.
Metal Collet Nuts: More durable and stable than plastic alternatives, improving safety and longevity.
Versatility:
Accommodates shank sizes from 1/32” (0.8mm) to 1/8” (3.2mm), suitable for drill bits, sanding drums, cutting wheels, and more.
Includes 10 brass collets, 2 nuts, and 2 accessories for diverse applications.
Convenience:
Keyless chuck enables quick bit changes without tools.
Compatible with most Dremel models (e.g., 3000, 4000) and light accessories.
"trail.biker
Reviewed in the United States on May 6, 2025
I have 1 of my Dremels set up as a router and 1 as a regular rotary tool. The router one used to have the standard chuck that requires a wrench because the name brand Dremel quick chuck won't fit inside the router attachment. This one is a bit smaller and just fits. My router bit switching just got a whole lot easier. Great product.
John S.
Reviewed in the United States on May 19, 2025
This was a great find that I should have looked for many years ago. The set allows many more types of bits to be used with a Dremel tool, well beyond the standard 1/8-inch size shank which my Dremel is set up for. My favorite piece in the set is basically a drill-type chuck which can be used for just about any of the smaller shank sizes that it will accommodate. The many collets in the set are also nice. The set now lives in my Dremel carrying case.
M. Johnson
Reviewed in the United States on May 17, 2025
Works great, holds tight, easy to change!
JJ
Reviewed in the United States on May 15, 2025
the LuMuank 15Pcs Chuck Collet Set for Dremel with Brass Collet and Keyless Chuck and Metal Nut are great addition to my dremel brand tool kit. They come as a multiple back with lots of duplicated when I need more. I like them.
Consumer
Reviewed in the United States on May 10, 2025
This is a great set for adapting my Dremel tool to bits with shanks that aren't the standard size. Works great and is easy to use.
Kindle Customer
Reviewed in the United States on April 18, 2025
This is a great set of collets and chuck. One of the first ways to check for a sellers overall quality of things they make is to check the most complicated product they sale. The little chucks are notorious for not running on center and having a lot of vibration. The first thing I did was screw on the chuck, put in a #80 (Ø .0135 inch) Drill bit and turned up my dremel up past 20,000 RPM. Smooth as silk and held the drill bit very well. No slipping of any kind. The I tried the collets and they worked equally as well. Two or three of the collets looked almost the same, but there are 10 collets that come with this kit and two Collet Chucks. They are made out of brass rather than aluminum like the ones that come with a dremel® kit. There is a tradeoff going to brass. They're stronger, but heaver which would only have a minor effect. Either way I can lose then just as easily. Often down between some lumber or other material that makes it harder to get out. They are not magnetic so I can't pick them up with my extendable magnet, but if they were steel and magnetic then cutting or drilling would allow the fine chips to stick the the collets and then ending up getting chips inside binding them up so you can't chuck a small drill on the center. Overall I really like this set. I think the seller put together a great combination of collets and chucks including an a collet wrench as well. Very nice.
Traveling Light
Reviewed in the United States on April 14, 2025
This is not a special tool or anything that requires a great deal of analysis. These are Dremel accessories without the Dremel label. I have owned LOTS of Dremel products for decades (yep, I’m an old guy). The quest for parts and accessories is more or less endless but not complicated. I check to see if the parts are reasonably well made, if they fit where they are supposed to fit, and if they function as intended.This little set seems fine to me. The parts all fit and seem on admittedly superficial observation to be of decent quality (that means of the ones I tried none of them broke right away).I use the keyless chuck on nearly all of my Dremel tools and the EZ Lock accessories are SO much better and faster than fiddling with collets. Collets are a hassle and less and less necessary, but some accessories and fittings still lock down and work best with a collet.This set will do what I need it to do and the price is very reasonable. It’s just not exciting.I recommend the set if you know you can use it.
Mark T.
Reviewed in the United States on April 13, 2025
This is a very nice set of collets and chucks. The variety of collet sizes is great. I have a variety of bits that I have acquired with multiple Dremel rotary tools over the years, some made by Dremel others not. The variety of collet sizes allow me to find the right size for whatever bit I am using. They hold very securely even with my Dremel router bits. Historically the routing has been hard on collets. I like the traditional chucks that screw over the collet and lock/unlock with the little wrench.However, the price of this set would be more than fair even if the only tool included was the tool less chuck. It is fantastic. The jaws open wide enough to hold my thickest bits and tightens very securely. I was worried that I was going to need a pair of pliers to loosen the chuck after working with it, but it never overtightened. It glides open and closed just like an expensive drill press chuck. So nice.The little stamped wrench is nice to have as I am prone to misplacing my wrenches. A back up can’t hurt. The only piece that puzzled me was the tiny Allen wrench (or hex key if you prefer). None of the included chucks or collets need an Allen key adjustment, and I don’t recall any of my bits ever needing an Allen key. I assume there must be a tool or bit out that does require the key so I will try to hold on to it just in case. (It is tiny so I may not succeed in keeping track of it.)
Recommended Products
