Shopping Cart

Your cart is empty.

Your cart is empty.

16' inch Universal Blade Slim Electric Radiator Fan Puller High Power Motor 3200 CFM 12V 120W with Mount Kit

4.9 (1) Write Review
Free shipping on orders over $29.99

$41.99

$ 19 .99 $19.99

In Stock

About this item

  • 10-Blade 12V 120W 16-Inch Radiator Engine Cooling Fan with Mounting Bracket and Tie Tie Kit.
  • CFM Rating: 3000, RPM Rating:2200±10% RPM. Fan Diameter (inches): 16 1/4". Thickness: 3 1/4". Current consumption: ≤12 amps.
  • The slim design provides excellent engine bay clearance. Good heat resistance and corrosion resistance ensure a long service life of electronic radiators.
  • Universal radiator cooling fan for a variety of vehicles and engines. Use as a head unit fan or auxiliary fan to provide extra cooling in cars, trucks, SUVs, muscle cars and RVs.
  • Push/Pull: Electric radiator cooling fans are reversible. It can be used as a puller.


Product Description

1
1

1
Fan Mounting Kit

4 x Mounting Rods

4 x Mounting Clips

8 x Foam Pads

4 x Mounting Pads

4 x Mounting Spring

Fitment:

This is a general purpose cooling fan. Before purchasing, please make sure the fan size is the same as your original fan size.

Universal Slim Fan Push Pull Electric Radiator Cooling Mount Kit

This is an excellent electric fan for radiators, oil coolers, transmission coolers, condensers and more. These powerful electric fans work with electrical systems as universal radiator cooling fans for a variety of vehicles and engines.

  • 100% Brand New
  • Diameter: 413mm/16.25inch
  • Thickness: 83mm/3.27inch
  • Maximum Fan CFM：1700 CFM
  • Maximum Fan RPM：2200±10%
  • 10 Pieces Blades
  • 12V 120W 12 AMPS

Puller Fans & Pusher Fans

1

Puller Fans

Puller fan on the other hand sits right behind the radiator(Back Postion). Pull air through the radiator core : pull the fresh airflow through the frille, and pull through the core first, then exits out of the back side of the radiator.Puller fans are the best way of mounting a fan if space is not a limitation between the front of the engine and the back of the radiator core.

Pusher Fans

Pusher fan sits in front of the radiator(Front Postion). Push air through the radiator core : fresh airflow enters through the grille and is pushed through the radiator core first, then exits out the back of radiator.If you space is an issue then use a pusher fan.

1

Installation:

  • Step 1: Open the hood of the car and remove the intake pipe above the cooling fan, so that the cooling fan can be removed smoothly.
  • Step 2: The cooling fan and the air conditioning fan are located above the fan frame, with a total of four corners, one screw at each corner. Use a professional tool to unscrew the four screws. When the screws are all unscrewed, we can remove the cooling fan from the car.
  • Step 3: Install the new cooling fan correctly on the new fan frame, and tighten and secure the four screws at the four corners.
  • Step 4: Start the engine test and the fan can run normally. After checking the error, install the intake pipe to the correct position.
  • Step 5: Tighten the fixing screws of the intake pipe, close the hood, and test to ensure that the new radiator fan is working properly and all operations are completed.

Professional Installer Is Highly Recommend(No Instruction Included)


ricky ballard
Reviewed in the United States on June 20, 2024
Delivered quick