Your cart is empty.
Your cart is empty.Hedge Trimmer Blade Compatibility & Replacement This premium 18" hedge trimmer blade set is compatible with S tihl HS45 and HS56 hedge trimmers. Replaces 4228-710-6050A, 4228-710-6051A, 59-200. Made from high-quality steel and processed using advanced laser cutting technology, these blades have unmatched sharpness and resilience 18” Hedge Trimmer Blade Set Installation Steps Remove the Old Blade Use a wrench or socket wrench to loosen the bolts that secure the current blade. Carefully remove the old blade from the trimmer. Cleaning the Blade Area Before installing the new blade, clear any dirt or debris from the blade mounting area on the trimmer to ensure a smooth installation and a secure connection. Installing the New Blade Place the new 18” Hedge Trimmer Blade over the mounting area so that it lines up with the bolt holes. Make sure they are properly aligned for optimal cutting performance. Securing the Blade Tighten the bolts using a wrench or socket wrench to ensure the blade is securely secured. Be careful not to overtighten as this may damage the blade or mounting area. Testing the Trimmer Once the blade is securely installed, reconnect the spark plug (if disconnected) and power on the trimmer. Test the blades to ensure smooth operation and check that they cut evenly. Instructions and Safety Precautions: Check Compatibility: Before purchasing, confirm that the 18” Hedge Trimmer Blade is compatible with your Compatible with HS45 and HS56 trimmers and make sure they match the required part number (4228-710-6050A, 4228-710-6051A, 59-200). Package Includes: 1 Pair of 18 Inch Hedge Trimmer Blades (2 Blades) Note: Before purchasing, please verify compatibility with your trimmer model and confirm blade length to ensure a perfect fit.
Dave B
Reviewed in the United States on May 20, 2025
This set of blades for my HS45 trimmer worked exceptionally!With a single pass of the new clipper blade the the bushes began to take shape and the cuts were clean and precise. The remaining brancehes no longer looked like they did when cut with the old blades like they were chewed shorter.Replacement of the old blades for the new ones was a breeze. After I found the correct star shaped driver bit it took a few short minutes to take out the ten screws and install the new blades. When installing the new blades it is advisable to change out the grease that is behind the backing plate. I did re-grease mine but I believe I might have used the wrong grease and will look for a heavier duty grease for the job. Removal of the old and incorrect grease would be an easy task, although I am guessing there is probably no more than 4 oz of grease needed.Overall job satisfaction and the clean cuts will help maintain a healthy bush by having a clean cut and reducing the surface area of the cut greenery.Thanks for reading and best wishes.
al w.
Reviewed in the United States on May 1, 2025
not compatible!!!!
Ben Campagna
Reviewed in the United States on April 28, 2025
Excellent quality and price
Recommended Products
