Your cart is empty.
Your cart is empty.Product Description
Heavy-Duty Wall Mount
3nm thickness stainless steel brackets which is strong and durable.
Suitable for both concrete and wooden wall.
6" height wall mount that perfect for mounting outdoor device
Applications
J Hopkins
Reviewed in the United States on March 22, 2025
Good finish, decent quality metal. Didn't use the hardware used larger lag screws. Says up to 2" pipe but it really can't. I had to hammer away and bend the u bolts around the pipe in order to make them fit. Like the grip and teeth on the jaw that holds the pipe. Not the beefiest mount but better than many and adequate for a medium to lighter heavy load. Worth the cost.
terry shoots
Reviewed in the United States on March 20, 2025
not really what i wanted
John on 821
Reviewed in the United States on June 25, 2024
I needed this set for a one inch flag pole ten feet tall to rise above my roof line. I had to space the brackets just one foot apart but I see no movement in the brackets when the 3 x 5 foot flag is waving in winds in excess of 20 mph. Sure, the pole wiggles, but that's another story. Good brackets!
Frank V.
Reviewed in the United States on March 18, 2024
Good product...
KarcoMO
Reviewed in the United States on December 25, 2024
Mount is well built and sturdy. Great support for the pole I needed for my weather station.
Victor H. Agresti
Reviewed in the United States on November 26, 2024
Stainless Steel Double Antenna Mast ClampHere’s what Google says about stainless steel:“All stainless steel metals are a type of steel. That means their chemical composition contains iron. In most cases, stainless steel varieties with iron in their composition are magnetic. If the alloy has an austenitic crystal structure, then it's not magnetic.”There are are least four ways a consumer can determine if a steel alloy is indeed stainless.1. Is it magnetic? If it isn't, it's almost certainly stainless. If it is magnetic, it could be a stainless alloy that's at least somewhat magnetic, so this test isn’t conclusive.- Every component, included the nuts & washers of this product are highly magnetic.2. Can it easily be dented, drilled or cut? If so, it is NOT stainless steel, which contains at least 10.5% chromium to harden the alloy.- My project required these brackets to be bent – and they bent like any softer steel would.- I also drilled a hole in one end of a bracket and the bit sailed through just like steel. Stainless is much more difficult to drill through.- Holding it in the vise imprinted the jaw face onto the bracket, another softness indicator.3. Can it be easily bent? E.g., by holding one end in a vise. Stainless is tougher than typical steel alloys.- These brackets bend just as easily as any steel of this thickness that I’ve worked with.4. Does it appear to be stainless steel, given that the color of stainless is easily discernable from typical steel.- No part of this product looks to be stainless steel.Summary:NONE of this product is stainless steel!I had previously tried another Amazon vendor’s antenna bracket and returned it because it was not stainless steel as advertised, so this bait and switch tactic is not unique to this seller.
Stan T.
Reviewed in the United States on October 4, 2023
I needed a standoff for my 2meter antenna pole. All it had to do is hold the pole to the side of my metal building. (The end of the pole resting on the ground)These worked perfectly. They are just what you see. Right out of the box, screwed them on and bolted up the pole. No problems. Nice to have something work as expected.
Moonbeam
Reviewed in the United States on January 16, 2023
This review is for the 6-inch standoff version. I was impressed with the heavy gauge of the standoffs. Very strong and easy to install. I am using it for a standard TV antenna and my mast extends about 5 ft above the wall/roofline. We get strong winds here and I don't expect any problems with these. Very heavy duty. I am sure they will outlast the antenna if a windstorm takes something out. I did not use the provided screws and anchors because I mounted to a steel building shell, but the included hardware looked good. Made in China.
Recommended Products