Your cart is empty.
Your cart is empty.
About the product
1. For ST electric guitar, great replacement for your ST guitar.
2. 10mm head machine peg holes for tuner installation.
3. Adjustable truss rod has been installed at the headstock.
4. Maple wood makes the sound more Loud and clear. And rosewood fingerboard gives a longer sound duration.
5. With inlay dots on side, it is convenient to distinguish the corresponding fret.
Specifications:
Item: Guitar Neck
Material:Maple Neck+Rosewood Fingerboard
Fret: 22
Peg Holes Diametre: 10 mm / 0.4 inch
Colour: Black
Neck Length: 67.5cm / 26.6 in
Fretboard Length: Approx. 48 cm / 18.75 in
Neck Depth: Approx. 1.8 cm / 0.7 in (with Fretboard 2.3 cm / 0.9 in)
Heel Depth: Approx. 2.0 cm / 0.8 in (with Fretboard 2.6 cm / 1.0 in)
Size: Approx. 67.5 * 5.5 * 2.5 cm / 26.6 * 2.2 * 1.0 inch
Weight: Approx. 635g/22.4oz
Package Included:
1x Guitar Neck
Phil W.
Reviewed in the United Kingdom on March 25, 2025
This product appears to be made from part resin, wood and other materials. It’s then covered in a hard black paint. Part of the heel was hollow when I tried to attach it to the body. One screw hole made completely hollowed out.
Maggie5
Reviewed in the United States on February 19, 2025
There okay…
JRI-Tech Yes!
Reviewed in the United States on January 18, 2025
DON'T BUY! Edit: I received the replacement (after a week) and it's worse! The neck is badly finished, I have this neck perfectly screwed in (I didn't want to waste my time putting threaded inserts in again) and yet the gap is even MORE that the last neck, however this time it's not only in the pocket, it's on the fretboard also! When the frets were being finished, the guy doing the work took off way, WAY too much off the fretboard, now my 1st string is sitting just off the end of the fretboard. So, I give up. I took a star away. I'm done until I can get a neck from someone who knows what they're doing.Seemed like a good deal, matched my black partscaster, and looked like good quality. The fit was off by .43mm on each side. Not bad, considering...but I figured the paint would have filled the gaps usually found on these. Then I found high frets. No biggie, I'll do a level, crown and polish. I noticed around the 19th fret that some funny business happened there, some scratches and some dried glue. I scuffed the glue off and looked closer, I put the leveler on it and the neck was dead straight....I had to string it up to find these dead zones. All this work for nil. 7-8 dead spots where the wood acts like it fell in. Now I have to send back a piece of firewood. I sure as heck don't want to do a fret job, even if it's only 3-4 frets...I shouldn't have to.
Peter Krenn
Reviewed in the United States on April 4, 2025
NOT CORRECTLY MADE AND VERY HEAVY! SAVE YOUR MONEY AND DO NOT BOTHER BUYING THIS GARBAGE!!! THEY SCAMMED ME WHICH IS NOT GOOD! BUT SOMEONE HAS TO BE THE ONE SCREWED AND THIS TIME IT IS ME. THIS NECK WEIGHS AT LEAST 10 TIMES MORE THAN A REGULAR STRAT NECK!!! THIS NECK IS NOT MADE WITH QUALITY MATERIALS AND IS COATED IN PLASTIC AND NOT PAINT OR ENAMEL!!! IT REALLY IS GARBAGE!!!
Recommended Products
