Your cart is empty.
Your cart is empty.Product Description
Description
The SMT/SMD components counter adopts the principle of photoelectric sensing, and uses the corresponding relation between the guide hole and the part, through the special-purpose processing chip and the large-scale centralized circuit processing to realize less error, accurately measure the number of SMD parts, can realize the convenient and quick count. It is an efficient auxiliary equipment for SMT material management.
Mirror
It helps the fiber optic detector to receive the signal better, and also facilitates you to observe the status of the point material.
Auxiliary Rod
The rod in front of the control panel helps you to make the machine stable without shaking and assists you to apply better force.
Rounded Edges
Compared to stiff right angles, the rounded burr-free edges make it more comfortable to touch while better caring for your skin.
Wide Application
It is suitable for belt elements made of SMD material and for pulleys of any diameter, and widely used for counting the quantity of SMD materials such as resistors, magnetic beads, capacitors, diodes, ICs, various chips, and LED beads. It can be applied in the electronic product manufacturing industry, SMT processing factory, EMS professional electronic manufacturing service factory, SMD parts manufacturer, SMD parts supplier, parts counter, and tape packaging manufacturer for fully automatic IQC incoming inspection, counting of tape packaging and checking of missing parts, inventory management, and other operations.
Installation
Mirror Installation
1. Use the hexagonal plate hand to screw out the two hexagonal screws behind the pointing machine.
2. Align the mirror with the hole of the dispenser and then screw on the screws.
Pallet Installation
1. Use the screwdriver to screw up the 2 screws on the rotating shaft.
2. Align the tray with the hole of the shaft and lock the screws.
Package Included
1 * SMT/SMD Components Counter
1* Power Cord
1* Mirror
1* Chinese and English Manual
All Accessories for Assembly
Operation Methods:
1.Connect the power cord to the host and connect the AC110V power supply.
2.Turn on the POWER switch of the machine panel, and the LCD panel will shine.
3.Press PITCH to set the spacing of parts to be counted and press "ENTER". Place the parts to count on the left side tray.
4.Manually pull out the material belt and clamp it between the material plate and counting gear, and align the intermediate hole of the first part and blank space to the middle line of the material plate.
5.Press the "STOP/RESET" button for 2 seconds to return the number to zero. Note: when pulling the material belt, the counting gear will rotate and count.
6.Press the "SETTING" button to switch to manual and automatic mode. If you choose automatic mode, you must input the quantity you want to count. Otherwise, press "FORWARD" and the motor will not rotate.
7.Pull the material belt by hand and wind it to the empty material plate. Press "FORWARD /RIGHT" to count.
8.The motor will stop when the quantity arrives. Due to the inertia principle, the number of counts may be more or less than the set value of about 1, which can be manually rotated to the LCD display set value in the direction of the material disk, that is, the number of parts.
9.After counting, press the "REVERSE /LEFT" tape and then roll it back to the original LEFT panel, and then stop rotating.
Alice Jensen
Reviewed in the United States on March 5, 2025
This is a good machine for counting all those SMT reel of parts. It is so sturdy and stable. It has multiple adjustments, which adds to my convenience. Like it!
Recommended Products