Your cart is empty.
Your cart is empty.(1)---UNIVERSAL FIT -- each of our blades will fit either 25.4mm Arbor (same as 1”) or a 20mm Arbor with included “reducer washer” with YOUR "Blade Hardware". (2)--- IMPORTANT |BLADE HARDWARE: A Blade will {not} fit onto the Trimmer Axel Shaft by itself like the String Line Dispenser Spool will, so you must acquire "Blade Hardware" (mounting adapter kit or parts) that consists typically of two small discs; one has a raised circle on it that the blade hole (arbor) fits onto, the 2nd small disc is the cap disc, then screw on the Nut and apply a Cotter Pin. Sorry, we DO NOT supply blade hardware. (3)--- CARBIDE MIX in our teeth is proprietary and 2nd to none. Just Tungsten is not enough; additives like: Hafnium, Tantalum, Titanium, Molybdenum, Silicone, Zirconium, Boron, Niobium, Chromium, & Vanadium, make for a better Carbide Mix for longer lasting teeth. (4)--- ULTRA HIGH RPM: Our blade is built for any RPM even super high RPM Trimmers (10,000+ rpm). Manufactured with a more flexible steel as compared to the much more brittle steel found with table saw blades (table saw blades can shatter if they hit an obstacle, plus they are only built for approx. 3,450 rpm so they should never be used with gasoline powered Garden Trimmers. (5)--- RENEGADE BLADE is the ONLY Carbide Brush Blade BRAND on AMAZON that has a {REPORT} from the foremost Testing Laboratory: UL, LLC. (6)--- CHOOSING THE CORRECT BLADE: Blades line up on a polarity scale with maximum TEETH on one end [for CUT] all the way to maximum CAVITIES [for GRAB] on the other end. EXAMPLE: Wood tree limbs require more teeth and no cavities, and wispy flexible brush or grass requires maximum grab as teeth alone just pushes grass over without cutting. THEREFORE: You must pick a {Teeth & Cavity Pattern} that best suits your material being cut. We offer blades to handle any: Wood, Bushes, Brambles, Hedging, Brush & Grass.
James E. Addison
Reviewed in the United States on March 31, 2021
I bought 2 of these blades to adapt to my trimmer, to cut down saplings on our property. Still on the first blade, and it's holding up very well. On a good strong trimmer they buzz right through a 2" thick sapling. These blades are the best I've used so far.
Dan Sandell
Reviewed in the United States on August 21, 2020
I expected the blades to cut fast, but they do not. It could be that my expectations were unrealistic. They do deal with thick brush trunks that the 4 blade cutter could not handle and for that they work fairly well.
Lady G
Reviewed in the United States on January 4, 2020
These blades work awesome. They were durable and did the job, I gave it some time just to make sure they lasted at least a few good uses. And now I need to order more to finish up my project
adam badzioch
Reviewed in Canada on January 12, 2020
Great for shrubs and small trees!
Joel G
Reviewed in the United States on September 7, 2017
Holy cow, these thing will cut!!I mount them on my Husqvarna brush cutter and walk right through brush and small trees.Just watch out, ..... they don't do so well around steel posts!! LOL But I have to say, even with 3 teeth in a row broken off, the blade still cuts like crazy! Maybe not as big of trees as it did previously.I'll be getting more of these blades as the need arises.
James M.
Reviewed in Canada on September 16, 2017
Works great , does just what I want,cutting down woody shrubs no problem.
maurice
Reviewed in Canada on July 19, 2017
super bon
Doug
Reviewed in the United States on February 11, 2017
So First I have to say that this is one of the Most dangerous things I have brought. But it is a killer blade -Use it with a TrimmerPlus BC720 Brushcutter (which I was disappointed with using the supplied blade) - The Renegrade blades fit perfect, did not need the enclosed adapter.Using the setup on a Sears Craftmen 32 cc Weedwacker. Spins this blade without a hiccup .Started with the 56 teeth RAZOR -- "HYBRID" - haven't tried the 20 teeth HAWK blade yet.Cuts like a champ. the Blackberry bushes don't slow it down at all, Able to clear several 2 in saplings, & even hacked off a 3" hardwood branch that was hanging in my way.Able to cut the stumps of the sapling down to the ground for future mowing with ease.After an hour of clearing - I did notice a few broken teeth - don't suppose the Steel fence post I hit had any thing to do with this.At this price - I can afford a couple screw ups like that.Only which it would clear the debris & feed it to the chipper :)Just be careful using this!
lots of hours of fun
Reviewed in the United States on January 10, 2017
I felt that I had to write a review on this product, I was that impressed.I put these on to my Stihl F90 (bicycle handles) straight trimmer.I wish I had on my GoPro and recorded what I did to these blades, I would not have believed the abuse I put them through if I had not seen it myself. (I may do a follow-up review when I get a new one and upload a video) The carbide tip blades are no joke, they will cut and cut and cut, they keep coming back for more until they only had 4 teeth left on them. With all of the teeth it will even cut grass, but that is not what it is intended for. I was cutting through dirt, rocks, asphalt to get to 1-3" saplings I even cut down a 5" tree just to see if I could. Both were great but preferred the RED one, can't remember the names. Getting 2 of those next time.I am an American Made buyer, but till I find an American company that can put out this quality of a product for this price, I am going to buy a couple more. I live in the Virgin Islands and had these in under a week, which is unheard of here. I will be a return buyer.I think most reviews are pretty artificial and take them with a grain of salt. So do what I did and drop 20 something dollars and find out for yourself.
Dayton L. Crouch
Reviewed in the United States on April 5, 2017
I bought these a few weeks back. I live in the Pacific Northwest so finding a few days that it's not raining has been an issue. First: Shipping. I was afraid I would pay almost 6 bucks for shipping, and it would take forever to get here. However, they put both blades in a U.S.P.S. priority envelope and I got it in two days I'm on my second Poulan Pro. I bought the straight shaft brush cutter attachment with the first one, and the second one with just a straight shaft drive. The 4 tooth "blade" that came with the first one, was a joke, and was more frustrating trying to cut blackberries and Scotch Broom. I installed the 52 tooth red one, and it's actually been "fun" to hack blackberries like butter. It also cuts grass, vines, small saplings, etc. One problem I've found, is that the first brush attachment has a metal guard with a very small clearance at the back, allowing debris to get stuck there and I have to let the machine idle down and physically remove stuff. Makes me a little leary doing that. The other attachment has a different head set up and a plastic guard with over an inch clearance, so I'll be swapping that out. It's not a problem with the blade, but if you have this attachment, it could be an issue and I'm not sure I'd want to run this mother without some type of guard. I have an area I'll be getting to that I'll probably use the blue blade to cut some larger stuff down. I highly recommend these blades and would gladly buy new ones when this one dies. Had I had this 5 years ago, my property would be completely cleared now.
Vincent Trevino
Reviewed in the United States on September 1, 2016
Haven't used them yet, but they look like good quality so far.
Recommended Products
![2 PCS [Non-Slip] Weed Eater Trimmer Shaft Clamp, Innovation Shaft Boom Clamp, Fit ∅28-32mm Poles, Trimmer Tubes, Bars and Shafts, For Use with Weed Eater Strap/Shoulder Strap](images/loading.gif)