Your cart is empty.
Your cart is empty.Pump is rated for 2800-3100 PSI at 2.3-2.5 GPM. | | | SPECIFICATIONS - Compatible with 7/8 Shaft Vertical Crank Engines, Thermal Release Valve Included, Brass Head, Rated 2800 - 3100 PSI @ 2.3-2.5GPM, 22 MM x 14 MM Hose Connection. MOUNTING - ***Note: For some models, spacers and longer bolts may be required for mounting the pump to your engine (not included)*** Common sizes usually needed are (2) 5/16-18 x 2 1/2" and (1) 5/16-18 x 3" hex Head bolts. ***PLEASE DOUBLE CHECK YOUR SPECS BEFORE PURCHASING, MOUNTING BOLTS & KEY WAY ARE NOT INCLUDED***
Lindsey Brannan
Reviewed in the United States on July 1, 2024
Great upgrade for my power washer
Customer
Reviewed in the United States on October 4, 2022
Direct replacement for an old 2009 Husky 3000 psi pressure washer. Should have included a new key way.
Eric Rall
Reviewed in the United States on July 20, 2020
I blew out the old pump on my Simpson pressure washer by turning the bypass valve up to high. The pressure wasn’t all the way up, and was trying to adjust it. My bad. Unbolted the old pump and put this one on, and it works like new again, maybe better
M Jenne
Reviewed in the United States on July 1, 2020
I had a 3000PSI Husky brand power washer that had been exposed to freezing temperatures with water in the pump so the pump housing was cracked.I purchased this replacement unit and was able to install it without issue in 10 minutes. I did not need any additional spacers for the installation.
Joe F
Reviewed in the United States on June 15, 2020
Pup did not fit my application although it stated work with honda 7/8" vertical shaft engine.Cn not get a response from the seller on the correct pump, so im returning it....
Charles Adwell
Reviewed in the United States on August 19, 2019
easy to install, works great , with no adjustment, pressure washer works like new now.
ArmyRNGR
Reviewed in the United States on June 13, 2019
The product looks amazing but the mounting structure doesn't fit with the bottom of the engine. I originally tried just pulling the old pressure washer pump and then installing this directly in its place but there was something bumping and rubbing so I pulled the engine and tried to fit and see where the problem was and is it turns out one of the legs goes directly over the oil pan drain plug and actually hits it and doesn't allow it to meet to the bottom of the engine or to the mounting dolly. the shaft fits perfectly everything looks good it's almost worth considering except that to change the oil, I would have to fully remove the pump each time.
HeidiF
Reviewed in the United States on December 10, 2019
Worked perfectly! Saved me from having to purchase a new pressure washer.
Recommended Products
$99.99
$ 45 .99 $45.99
$84.99
$ 33 .99 $33.99
$699.95
$ 99 .00 $99.00